Konica Minolta bizhub PRESS 1250 IC-309m User Guide - Page 138

130 Chapter 9-Job parameters Parameter Print order Near-Line Finisher Option Collation Delivery Print order Device Inverter Generate registration mark Description ● Trim ● Priority Print ● Clicking Shift Settings enables you to shift the image on your cover horizontally and vertically. Collated-Prints a complete copy of the job before the first page of the next copy is printed. Sets the print order from back to front. ● Face up-Delivers the job face up. ● Face down-Delivers the job face down. Provides the following options: ● 1 to N-Prints a complete copy of the job from the first page to the last page. ● N to 1-Prints a complete copy of the job from the last page first in the stack, to the first page, last in the stack. Enables you to select one of the near-line finishing devices, Duplo DC-645, DSF-2000, or DSF-5000. ● Duplo DC-645 finisher cuts, slits, and creases documents using registration marks and barcodes. Note: A barcode is used only if you want to use a preset job number. Otherwise, you can select it manually on the Duplo DC-645. ● DSF-2000 finisher is a sheet feeder that is configured with a barcode reader. ● DSF-5000 finisher is a sheet feeder that is configured with a barcode reader. Select Inverter when processing a stack in which the first page is face down and on the bottom of the stack. Note: Clear Inverter for a stack whose first page is face up on the bottom of the stack. Select Generate registration mark to print registration marks on sheets.