Konica Minolta bizhub PRESS 1250 IC-309m User Guide - Page 136

128 Parameter Option Description Chapter 9-Job parameters ● Punch-The values vary according to the type of punch unit connected. The number of holes is 2, 3, or 4. Multi Tri-foldin Saddle stitch sub tray Saddle stitch main tray Multi hole punch-This option is available only if the multi hole punch module is connected. ● Center Staples-Staples the center of the booklet ● Trim Stacker Sub Tray Stacker Main Tray Multi hole punch-This option is available only if the multi hole punch module is connected. ● Multi hole punch-This option is available only if the multi hole punch module is connected. ● Offset ● Sample print-Enables you to print extra pages to an easily accessible output tray during a long print job and verify that the printer is performing as expected. For example, when a job is currently printing to a closed elevator (such as, 1000 pages to an output tray that cannot be opened until the entire job is completed), you can use the sample print function to print a separate page or finished output set to an open output tray to verify the output. If the output is unsatisfactory, you can take corrective action. Perfect binder Multi hole punch-This option is available only if the multi hole sub tray punch module is connected.