Konica Minolta bizhub PRESS 1250 IC-309m User Guide - Page 86

78 Chapter 7-Production workflows 1. In the Storage area, double-click your job. 2. Click Exceptions, and then click Exceptions From File. 3. In the Select Rules Set list, select the rule set that you created for your file. 4. (Optional) To verify or edit the mapping for the dynamic page exceptions, click File mapping. The File mapping results window appears. For each parameter that was defined in the file, a pass or fail icon indicates whether the mapping was successful. 5. (Optional) To edit the mapping results, perform any of the following steps: a. To select a different paper stock, in the Paper ProfileName column, click the paper name that you want to change and in the list that appears select a new paper name. b. To change the print method, in the Print method column, click the print method that you want to change and in the list that appears select a new print method. c. To change the tray, in the Tray column, click the tray that you want to change and in the list that appears select a new tray. d. Click OK. 6. Click Submit to send your job for printing. Printing a file with mixed paper sizes Print a file that includes two or more different paper sizes, or predefined tabs. Requirements: Note: The IC-309m print controller favors processing jobs for Long Edge Feed (LEF) paper orientation over Short Edge Feed (SEF) paper orientation, unless you specifically requests SEF. For example: when both Letter (8.5x11) (LEF orientation) and Letter (8.5x11) S (SEF orientation) are loaded, the IC-309m print controller processes the job as Letter (8.5x11), and not Letter (8.5x11) S. If you want to process the job as Letter (8.5x11) S, explicitly set Letter (8.5x11) S as the paper size in the Job Parameters window. The required paper sizes must be loaded in the trays.