Kyocera 3035 Reference Guide - Page 38

Network Digital or analog mode 1. Select Menu → Settings → Network → Digital or Analog. 2. Press in to select an option: • Automatic-Automatically switches the phone between digital and analog. • Analog only-Sets the phone to work in analog mode only. • Analog call-Forces a call into analog mode for the duration of the next call. • Digital only-Sets the phone to work in digital mode only. Roam Option This setting determines which signals your phone will accept. 1. Select Menu → Settings → Network → Roam Option. 2. Press in to select an option: • Automatic (recommended setting)-Accepts any system the phone service provides. • No Roaming-Prevents you from making or receiving calls outside of your home service area. Roam/Service Alert Use this setting to have the phone alert you when you roam outside of your home service area. 1. Select Menu → Settings → Network → Roam/Srvc Alert. 2. Press in to select an option: • Disabled-You are not alerted if you roam outside your home service area. • When no service-Alerts you when service is lost. When service is re-acquired, you will be alerted again. • On roam change-Alerts you when roaming service is acquired. When home area service is acquired again, you will be alerted again. • On any change-Alerts you if there is a change in roaming service or if the phone loses service. Privacy Alert 1. Select Menu → Settings → Network → Privacy Alert. 2. Press in to select an option: • Enabled-Plays an audible alert whenever enhanced privacy is lost or regained and a call is in progress. • Disabled-No alerts are used. An alert message always shows on the screen, regardless of these settings. Note 32 Reference Guide for the QCP 3035 Phone