Kyocera KM-1650 Scan System (F) Operation Guide (Setup Edition) - Page 14
Caution, Important
View all Kyocera KM-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Set-up Connecting the scanner to your computer network 1 Turn the main switch located on the right side of the scanner OFF ({). Caution ALWAYS turn the main switch to the scanner OFF BEFORE connecting the network cable. 2 Connect a 10BASE-T or 100BASE-TX cable to the scanner interface connector located at the back side of the right side of the scanner. Important! NEVER attempt to remove the Scanner Interface Card. 3 Turn the main switch to the scanner back ON ( | ). 2-2
Set-up
2-2
Connecting the scanner to your computer network
1
Turn the main switch located on the right side of the
scanner OFF (
).
Caution
ALWAYS turn the main switch to the scanner OFF BEFORE connecting the network cable.
2
Connect a 10BASE-T or 100BASE-TX cable to the
scanner interface connector located at the back side
of the right side of the scanner.
Important!
NEVER attempt to remove the Scanner Interface Card.
3
Turn the main switch to the scanner back ON ( | ).