Kyocera KM-1650 Scan System (F) Operation Guide (Setup Edition) - Page 25

Performing the Required Operation at the Scanner When performing the scanning operation at your computer 1 Run the TWAIN Source in the corresponding application. The main dialogue box for the TWAIN Source will appear. Make any settings that you want, and put a check mark in the [Waiting Scan] checkbox. 2 Click on the [Connect] button in the main dialogue box and, once the connection to the scanner is made, click on the [Scan] button. Note Putting a check mark in the [Waiting Scan] checkbox will allow you to start the actual scanning operation by pressing the Start key at the scanner. 3 Set the original that you want to scan in the scanner and press the Start key. Scanning will begin. Notes • Scan settings can also be made on the operation panel of the scanner. Change any settings there that you want. • If you enter different settings in your computer and in the scanner, the settings made on the operation panel of the scanner will take priority. 3-5