Kyocera KM-1650 Scan System (F) Operation Guide (Setup Edition) - Page 26

Performing the Required Operation at the Scanner Scan setting The scan setting screen is displayed when scanning originals. To carry out the various settings, perform the following procedures. After completing the scan settings, if you set an original in the scanner and press the Start key, scanning will start. K G CE F H J DA B I A Auto Exposure key - Press this key to select the automatic exposure setting. B Image concentration adjustment key - Press these keys to select an exposure level. Notes • 7 levels in the normal mode, 13 levels in the maximum mode. • If the automatic exposure mode is set, all the exposure indicators are off. C Auto%/100% key - Press this key when you enable automatic paper orientation selection depending on the original in the gray scale mode. D Original Image Type key - Press this key to select the original image type. Note The Photo mode cannot be selected with the Send E-mail function. E Original Size key - Press this key to specify the original size. F Paper Select key - Press this key to specify the transmission (image) size. The scanned original image will be automatically reduced or enlarged to the specified size. Note In the gray scale mode, the orientation of paper will be changed with this key. To enable again the automatic paper orientation selection depending on the original, press the AMS/100% key. G Scanner Function key - The following settings can be adjusted. • Resolution • File type • Original type • Auto selection • Border erase • Original set direction • Continuous scanning • Output by page Note For details on each setting, see the Online Manual. H Enter (OK) key - Press this key to confirm the setting in various setting screens. I Start key - Press this key to start scanning. J Stop/Clear key - Press this key to stop scanning, clear an entered value or return to the previous screen. K Scanner key - If you select this key to cancel scan setting, the scan setting screen will appear. 3-6