Kyocera KM-2560 2560/3060 Operation Guide (Basic Edition) - Page 119

Basic Operation Data to be entered are as follows. Item Data to be entered Max. characters Host Name* Path Host name or IP address of the PC to Up to 62 receive the data. characters Path to the receiving folder such as Up to 126 3 follows. characters For example, \User\ScanData. Login User User name to access the PC Name For example, abcdnet\james.smith Up to 62 characters Login Password Password to access the PC Up to 62 characters * To specify a port number different from the default (139), enter using the format "host name : port number" (e.g., SMBhostname:140). 6 Upon completion of all entries, press Ready to send. Place original . [Connection Test] to check the Folder Path Entry SMB Host Name connection. FTP Path Login User Name Login Password Destination 1 Add to Addr Book Status Next Dest. Cancel Connection Test OK 10/10/2007 10:10 NOTE: Connected appears when connection to the destination is correctly established. If Cannot connect appears, review the entry. To specify another destination, go to the step 7. To specify only one destination, go to step 8. 7 Press [Next Dest.] and repeat steps 4 to 6 to specify the destination. You can specify a combined total of up to 10 FTP and SMB destination folders. NOTE: When [Add to Addr Book] is displayed, the entry is registered in the Address Book. 8 Press [OK] to register the entry in the destination list. 9 Check the destination list. Select a destination and press [Detail/Edit] to check and edit it. Edit it, if necessary, referring to steps 4 to 6. OPERATION GUIDE 3-31