Kyocera KM-2560 2560/3060 Operation Guide (Basic Edition) - Page 190

Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Memory is full. - Unable to continue the job as the - memory is used up. Press [Continue] to print the scanned pages. The print job cannot be processed completely. Press [Cancel] to cancel the job. Paper jam. - If a paper jam occurs, the machine will stop and the location of the jam will be indicated on the touch panel. Leave the machine on and follow the instruction to remove the jammed paper. 6-12 Print overrun. - Warning. Low printer memory. The - job is paused. Press [Continue] to resume the job. Removable memory - error. This job is canceled. Press [End]. - Removable Memory is - removed. Press [End]. - Replace all originals - and press [Continue]. Remove originals from the document processor, put them back in their original order, and place them again. Press [Continue] to resume printing. Press [Cancel] to cancel the job. 2-49 Replace the waste - toner box. The waste toner box is full. Replace 5-7 the waste toner box. Reset all originals in Are there any originals left in Remove originals from the document - Document processor. the document processor? processor. Scanner memory is - full. Scanning cannot be performed due - to insufficient memory of scanner. The job is canceled. Press [End]. Is the acceptable scanning Press [Continue] to print, send or - count exceeded? store the scanned pages. Press [Cancel] to cancel printing, sending or storing. 6-8 OPERATION GUIDE