Kyocera KM-2560 2560/3060 Operation Guide (Basic Edition) - Page 90
Power On/Off
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Basic Operation Power On/Off Power On Open the main power switch cover and turn the main power switch on. Blinking/Lighting of each Key/Indicator When turning on the main power switch, Key/Indicators such as Copy or Send blink. Blinking: This function is in preparation. When each key is ready, the indicator lights out one by one. Unlit: This function is ready. Lit: This function is selected. Copy is selected as the default so that the Copy key/indicator lights on first. NOTE: A key whose indicator is unlit can be used even if any other key remains blinking. If the optional Security Kit is installed, a message might display indicating the security function is being activated and time may be taken to start up when the power is turned on. Power Off IMPORTANT: When turning off the main power switch, do not turn on the main power switch again immediately. Wait more than 5 seconds, and then turn on the main power switch. Before turning off the main power switch, press the Power key on the operation panel to off. Make sure that the Power key and the memory indicator are off before turning off the main power switch. CAUTION: The hard disk may be operating when the Power key or Memory indicator is lit or blinking. Turning off the main power switch while the hard disk is operating may cause damage. 3-2 OPERATION GUIDE