LG 22SM3B User Guide - Page 42
No Signal Power Off 15Min Command: f g, Auto Power Off 4 Hours Command: m n, Language Command: f
View all LG 22SM3B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
ENGLISH 42 22. On Timer Input (Command: f u) Select an external input for the current On Time setting and add a new schedule. Transmission [f ][u][ ][Set ID][ ][Data1][Cr] [f ][u][ ][Set ID][ ][Data1][][Data2][Cr] Data (Add schedule) 40: COMPONENT 60: RGB 70: DVI-D A0: HDMI1 A1: HDMI2/OPS A2: OPS/HDMI3/DVI-D A5: OPS/DVI-D A6: HDMI3/DVI-D D0: DISPLAYPORT Data1 (Read schedule) 1. f1h to f7h (Read data) F1: Select the 1st schedule input F2: Select the 2nd schedule input F3: Select the 3rd schedule input F4: Select the 4th schedule input F5: Select the 5th schedule input F6: Select the 6th schedule input F7: Select the 7th schedule input Data2 (Read schedule) FF * To read the schedule input, enter FF for [Data2]. If no schedule is available for [Data1] when attempting to read the schedule data, the text 'NG' will be displayed and the operation will fail. (Example 1: fu 01 90 - Move each schedule input down one row and save the 1st schedule input in HDMI mode.) (Example 2: fu 01 f1 ff - Read the 1st schedule input.) * This function is supported only when 1 (Year/Month/Day), 2 (Hour/Minute/Second), On Time (Repeat Mode/Time) are set. ** When in DTV input mode, the input is switched to PC mode. ** It may not be supported depending on the model. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] [u][ ][Set ID][ ][OK/NG][Data1][Data2][x] 23. No Signal Power Off (15Min) (Command: f g) Sets the monitor to enter Automatic Standby mode if there is no signal for 15 minutes. Transmission [f ][g][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 24. Auto Power Off (4 Hours) (Command: m n) Sets the monitor to enter Auto Power Off after 4 hours. Transmission [m][n][ ][Set ID][ ][Data][Cr] Data 00: Off 01: 4 hours Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] 25. Language (Command: f i) Sets the OSD language. Transmission [f ][i][ ][Set ID][ ][Data][Cr] Data 00: Czech 01: Danish 02: German 03: English 04: Spanish (Europe) 05: Greek 06: French 07: Italian 08: Dutch 09: Norwegian 0A: Portuguese 0B: Portuguese (Brazil) 0C: Russian 0D: Finnish 0E: Swedish 0F: Korean 10: Chinese (Mandarin) 11: Japanese 12: Chinese (Cantonese) Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]