LG 22SM3B User Guide - Page 52

ENGLISH 52 78. Easy Brightness Control Schedule (Command: s s) Sets Easy Brightness Control schedules. Transmission [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. F1-F6 (reads data) F1: Reads the 1st data from the Easy Brightness Control F2: Reads the 2nd data from the Easy Brightness Control F3: Reads the 3nd data from the Easy Brightness Control F4: Reads the 4th data from the Easy Brightness Control F5: Reads the 5th data from the Easy Brightness Control F6: Reads the 6th data from the Easy Brightness Control 2. FF: Reads all stored lists 3. e1-e6 (deletes one index); e0 (deletes all indexes) E0: Deletes all Easy Brightness Control. E1: Deletes the 1st Easy Brightness Control. E2: Deletes the 2nd Easy Brightness Control. E3: Deletes the 3rd Easy Brightness Control. E4: Deletes the 4th Easy Brightness Control. E5: Deletes the 5th Easy Brightness Control. E6: Deletes the 6th Easy Brightness Control. 4. 00 to 17: 00th to 23th hour Data2 00 to 3B: 00th to 59th minute Data3 00 to 64: Backlight, 0 to 100 * If you want to read or delete the configured Easy Brightness Control lists, set [Data2][Data3] to FF. * If you want to import all the configured Easy Brightness Control lists through FF, do not enter any values in [Data2] [Data3]. * When all the configured Easy Brightness Control lists are imported through FF, OK is acknowledged even if there is no stored list. Example 1: ss 01 f1 ff ff - Reads the first index data from the Easy Brightness Control. Example 2: ss 01 ff - Reads all index data from the Easy Brightness Control. Example 3: ss 01 e1 ff ff - Deletes the first index data from the Easy Brightness Control. Example 4: ss 01 07 1E 46 - Adds a schedule whose time is 07:30 and whose backlight is 70. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] * This feature may not be supported in certain models. 79. MultiScreen Mode & Input (Command: x c) Saves or controls the MultiScreen Mode and input. Transmission [x][c][ ][Set ID][ ][Data1][ ][Data2][ ][Data3[ ][Data4] [ ][Data5[ ]Cr] Data1 (sets the MultiScreen Mode) 10: PIP 22: PBP2 23: PBP3 24: PBP4 Data2 (sets the MultiScreen Main Input) Data3 (sets the MultiScreen Sub1 Input) Data4 (sets the MultiScreen Sub2 Input) Data5 (sets the MultiScreen Sub3 Input) 20: AV 40: COMPONENT 60: RGB 80: DVI-D 90: HDMI1 91: HDMI2/OPS 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D C0: DISPLAYPORT Acknowledgement [c][ ][Set ID][ ][OK/NG][ ][Data1][Data2][Data3] [Data4] [Data5][x] * This feature may not be supported in certain models. ** Only the input modes supported by the model works. 80. Aspect Ratio (MultiScreen) (Command: x d) Saves or controls the Aspect Ratio (MultiScreen) screen. Transmission [x][d][ ][Set ID][ ][Data1][ ][Data2][Cr] Data1 01: Controls the Main input 02: Controls the Sub1 input 03: Controls the Sub2 input 04: Controls the Sub3 input Data2 00: Full 01: Original Acknowledgement [d][ ][Set ID][ ][OK/NG][Data1][Data2][x] * This feature may not be supported in certain models.