LG 22SM3B User Guide - Page 46
Remote Control/Local Key Lock Command: k m, Fail Over Input Select Command: m j
View all LG 22SM3B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
ENGLISH 46 44. DPM Select (Command: f j) To set the DPM (Display Power Management) function. Transmission [f ][j][ ][Set ID][ ][Data][Cr] Data 00: Off 01: 5 seconds 02: 10 seconds 03: 15 seconds 04: 1 minutes 05: 3 minutes 06: 5 minutes 07: 10 minutes Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 45. Remote Control/Local Key Lock (Command: k m) Adjusts the remote control/local key (front) lock. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Off (Lock Off ) 01: On (Lock On) * When the monitor is turned off, the power key works even in On (01) mode. Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 46. Power On Delay (Command: f h) Sets the schedule delay when the power turns on. (unit: seconds). Transmission [f ][h][ ][Set ID][ ][Data][Cr] Data 00 to FA: min. 0 to maximum 250 (seconds) * The maximum value may differ depending on the model. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x 47. Fail Over Select (Command: m i) Selects an input mode for auto switch. Transmission [m][i][ ][Set ID][ ][Data][Cr] Data 00: Off 01: Auto 02: Manual Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 48. Fail Over Input Select (Command: m j) Selects an input source for auto switch. * This command is only available when the Fail Over (auto) mode is set to Custom. Transmission [m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ] [Data4]...[ ][DataN][Cr] Data 1 to N-1 (Input priority: 1 to N-1) 40: COMPONENT 60: RGB 70: DVI-D 90: HDMI1 91: HDMI2/OPS 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D C0: DISPLAYPORT Data N: E0: INTERNAL Memory E1: USB E2: SD CARD Acknowledgement [j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4] ...[DataN] [x] Data 1 to N-1 (Input priority: 1 to N-1) 40: COMPONENT 60: RGB 70: DVI-D 90: HDMI1 91: HDMI2/OPS 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D C0: DISPLAYPORT Data N: E0: INTERNAL Memory E1: USB E2: SD CARD * Some input signals may not be available with certain models. **The data number (N) may vary depending on the model. (The data number depends on the number of supported input signals.) *** Only the value of E0, E1, or E2 is acceptable for the last data.