LG 37LD325H Owners Manual - Page 129
Commercial Mode Setup for Master TV
View all LG 37LD325H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Commercial Mode Setup for Master TV This section describes how to set up a Master TV when the EBL is in Pass-through Mode. Note: Disconnect all Aux inputs. Under certain conditions, Auto Tuning (Channel Search) is disabled if there is an Aux input active. Note: Refer to "FTG Mode of Operation" on pages 23 to 26 for information on configuring/editing Channel Map and Installer Menu settings for an individual TV in FTG Mode. 1. Set Installer Menu items. a) Use the Installer Remote to enter the TV Installer Menu: Press MENU repeatedly until the on-screen menu locks up, and then press 9-8-7-6 + ENTER. Refer to pages 14 to 20 for detailed information on Installer Menu items. b) Set Installer Menu item 117 FACT DEFAULT to 001 and press ENTER on the Installer Remote. This clears all Installer Menu custom settings, channel labels/ icons, etc. and reloads the factory default settings. The value will change back to 0 after the internal TV controller (Protocol Translator Card [PTC]) has been restored to factory default condition. This step ensures that the TV Channel Memory will be the active Channel List. c) Set Installer Menu item 003 BAND/AFC, as appropriate. • Broadcast: Set to 000. • CATV: Set to 001 (default). • HRC: Set to 002. • IRC: Set to 003. d) Set any other Installer Menu items that affect your TV programming network to the required configuration. For example, enable/disable Aux sources, set a Start Channel, etc. e) After you have adjusted all required Installer Menu item settings, press ENTER on the Installer Remote to exit the menu and save your changes. 2. Set up TV features. On-screen setup menus control the features of the TV (see page 21). Press MENU on the Installer Remote to access the setup menus, and then set Channel, Picture, Audio, Lock, Time, etc. options to the desired configurations. See also the Clonable Menu Features list on page 27. Note: If desired, you can run Auto Tuning (see step 3) prior to completing this step. XXLD320H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Typical TV Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. 117 FACT DEFAULT 001 003 BAND/AFC 00X Adjust the settings for these Installer Menu items. CHANNEL PICTURE AUDIO TIME LOCK OPTION INPUT MY MEDIA Set the TV features to the desired configuration for the end user. (Continued on next page) 12 206-4163