LG L26W56S Operation Guide - Page 42

Cloning Connections / Teaching Setup Teaching the Master Setup to Another L26W56X Connections for the LT2002 to Teach another L26W56X the Master Setup Antenna or CATV THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS VERSION XX THE SW IS REVISION XX CLONE CLOCK = XX:XX TV CLOCK = XX:XX -PRESS ANY KEY TO CONTINUE. -DISCONNECT CLONE WHEN DONE. Master L26W56X Teach Master L26W56X's Setup to the target L26W56X After learning is complete, remove the M.P.I. cable from the master L26W56X and connect it to the target L26W56X that you want to copy the master L26W56X's setup into. With "THE CLONE HAS CONTROL OF TV" message displayed, press 2 to go to the "TEACH TO TV" option, press ON/OFF, POWER, or ENTER. Select the LT2002 memory that the new setup is in. Press On/Off to transfer the new setup and other information to the new L26W56X. Teaching usually takes 2-3 minutes. After the "TEACHING COMPLETE" message is displayed, press any key to return to the Clone menu, then press ON/OFF, POWER, or ENTER. If finished, detach M.P.I. cable from the target, newly cloned L26W56X. Disconnect L26W56X Power for 5 Seconds Unplug the AC power cord of the newly cloned L26W56X from the power outlet for about 5 seconds to activate the newlycopied setup. PAGE 42 Ferrite Core (TDK, ZCAT 2035-0930) ¤ QuickSet II Programmer LT2002 Clone Programmer CLONE SELECTION MENU (1) LEARN FROM TV (2) TEACH TO TV (3) SET CLONE CLOCK FROM TV (4) SET TV CLOCK FROM CLONE (5) DISPLAY TV SETUP (6) DISPLAY CLONE SETUP - TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS. - TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER This menu should appear after any key is pressed on the Installer remote. TEACHING IN PROGRESS, PLEASE WAIT This display will appear during Teaching function. TEACHING COMPLETE This display will appear after Teaching is complete.