LG L26W56S Operation Guide - Page 54

L26W56X Aux Input Configuration / Troubleshooting L26W56X Aux Input Configuration ENABLE MPI DATA DIRECT ACCESS Tuning L26W56X Installer Menu OLD_OCV OLD_OCV =0 =1 Source Input Source Mode Number Labeling MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) Value Labeling DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) Value Labeling DATA STATUS TYPE 0X0D AUX SOURCE (R) STATUS AUX SOURCE ASSIGNMENT 130 90 Video2 (Front) CV ONLY 34 CAMPORT_EN 0x01 Video Front (Camport) 0 Video Front (Camport) 0(VIDEO) 2 131 91 Video1(Rear) CV ONLY 39 REAR_AUX_EN 0x02 Rear Video (Aux) 1 Rear Video (Aux) 0(VIDEO) 1 132 92 Component 2 91 YPrPb2 EN 0x04 S-Video Rear 2 S-Video Rear 0(VIDEO) 5 133 93 DVI/HDMI1 DTV/PC Auto 35 COMPPORT EN 0x08 Front Computer 3 Front Computer 0(VIDEO) 3 134 94 RGB1 DTV/PC Auto 87 REAR RGB EN 0x10 SVGA Rear 4 Computer 0(VIDEO) 4 135 95 Video 3 CV S-Video 92 RGB2 ENABLE 0x20 NTSC Rear Computer 5 NTSC Rear 0(VIDEO) Computer 1(S-VIDEO) 7 136 96 Component1 Rear 38 YPrPb EN 0x40 YUV Component 6 YPrPb component 0(VIDEO) 6 video Troubleshooting Some quick and easy tips to resolving problems Symptoms Possible Cause(s) Software Problems Software Corrupted. 2-5-5 + MENU performed more than once. Virtual and Physical 2-5-5 + MENU not performed. channels appear in channel scan w/Channel Up/Down. Can not direct enter channel number Channel not included in channel scan in TV controller. Possible Solution(s) See Page(s) Start all over with item 117 and Enter then redo Auto Program, Channel 39 List, etc. Note: 2-5-4 + MENU can be done more than once. After Auto Program and Channel List, etc. press 2-5-5 + MENU to 39 transfer channels and TV setup to internal TV controller. Afterward, only Physical or only Virtual channels will appear in digital channel scan, analog channel scan will be normal. After 2-5-5 + MENU, only channels included in TV controller will appear. 39 If channel is available it can be added to channel scan. If it is not available it will not appear on the TV screen. PAGE 54