LG LUWD1CW Owners Manual - Page 19
Using Non-Skid Pads Optional
View all LG LUWD1CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 Tighten the locknuts. Turn the locknuts counter-clockwise and tighten them when the washer is level. Lock nut Tighten all 4 lock nuts securely 4 Recheck the washer's levelness. Push or rock the top edges of the washer gently to make sure the washer does not rock. If the washer rocks, repeat steps 1-3. CAUTION ••Using the washer without leveling it may cause excess vibration and noise, leading to a machine malfunction. ••Extend the leveling feet only to level the washer. If you extend the leveling feet unnecessarily, it may cause abnormal vibration of the washer. INSTALLATION 19 Using Non-Skid Pads (Optional) If you install the washer on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, install the non-skid pads under the leveling feet and adjust the level. 1 Clean the floor to attach the non-skid pads. Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may slip. 2 Adjust the level after placing the washer in the installation area. 3 Place the adhesive side of the non-skid pad on the floor. It is most effective to install the non-skid pads under the front leveling feet. If it is hard to place the pads under the front leveling feet, place them under the back leveling feet. This side up Adhesive side Remove backing 4 Recheck the washer's levelness. Push or rock the top edges of the washer gently to make sure that the washer does not rock. If the washer rocks, level the washer again. ENGLISH