Lacie 2big Network 2 User Manual - Page 13
STEP 1: Connect the Power Supply, TECHNICAL NOTE - specifications
View all Lacie 2big Network 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
LaCie 2big Network 2 • DESIGN BY NEIL POULTON User Manual 2.1. STEP 1: Connect the Power Supply 1. Connect the power supply to a wall outlet and to the LaCie 2big Network 2 (Fig. 03). Now move on to step 2, section 2.2. STEP 2: Connect the Ethernet Cable. CAUTION: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from another LaCie device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your warranty. TECHNICAL NOTE: You may use your LaCie drive when in a foreign country thanks to its 100-240 Volt power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. LaCie accepts no responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized by LaCie will void your warranty. Fig. 03 Connecting to a Network page 13