Lacie 2big Network 2 User Manual - Page 50
UPS Management,
View all Lacie 2big Network 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
LaCie 2big Network 2 • DESIGN BY NEIL POULTON User Manual Administering Your LaCie 2big Network 2 page 50 4.12.1. UPS Management The 2big Network 2 supports UPS (uninterrupted power supply) management. If you connect a supported UPS device to the 2big Network 2's USB port, in the Dashboard you will see modifiable parameters. In the left-hand column, a bullet will indicate power supply status. ✦✦ If green, power is being supplied through the power cable. ✦✦ If gray, power is not being supplied through the power cable. On the right, under the heading Battery threshold level (%), you can choose a minimum percentage of battery power at which the 2big Network 2 will automatically enter stand-by mode. Below, in the case that battery power is completely drain and the drive is automatically shut down, you can elect to have the drive restarted once power has been restored. NOTE: For a list of supported UPS devices, click the Supported UPS link. Fig. 66