Lacie 2big Network 2 User Manual - Page 58
Dashboard: RAID, 4.17.1. Modify RAID Mode - 2tb
View all Lacie 2big Network 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
LaCie 2big Network 2 • DESIGN BY NEIL POULTON User Manual Administering Your LaCie 2big Network 2 page 58 4.17. Dashboard: RAID This page will allow you to monitor and change the RAID array (Fig. 80). 4.17.1. Modify RAID Mode To modify the RAID mode, click the Change button. Then, choose which RAID mode and click Apply. CAUTION : Changing the RAID mode destroys all data stored on the LaCie 2big. If you have saved data on the drives, back up data before following these steps. TECHNICAL NOTE: Before you change the RAID mode of the LaCie 2big, familiarize yourself with the 2big's RAID modes. See section 4.17.2. About RAID Modes. Rebuild times: The following chart shows the approximate time it takes to convert from a RAID 0 array to another mode. New Mode RAID 1 RAID 1 Total Size 1TB 2TB Approx. Time 2 hours 4 hours Fig. 80 Fig. 81 Fig. 82