Lacie 2big Network 2 User Manual - Page 27
STEP 1: Connecting the USB cable - network 2tb
View all Lacie 2big Network 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
LaCie 2big Network 2 • DESIGN BY NEIL POULTON User Manual Accessing & Transferring Files page 27 3.4.1. STEP 1: Connecting the USB cable IMPORTANT INFO: You must allocate space to USBShare before connecting the drive to your computer. See 4.11. Dashboard: Drive Information. 1. Attach one end of the USB cable to an available USB 2.0 port on your computer (Fig. 26). 2. Connect the other end of the USB cable to the USB port (type B; see Fig. 26) on the back of the 2big Network 2. 3. Move on to the next step, 3.4.2. STEP 2: Turn On the Drive. TECHNICAL NOTE: The 2big Network 2 USBShare is formatted in MS-DOS (FAT32) for use with PCs and Macs. You can reformat the drive in MS-DOS (FAT32) using the Dashboard (see 4.11. Dashboard: Drive Information for details). To format the USBShare into a different file format (NTFS or HFS+), refer to the documentation for your operating system's disk management application. TECHNICAL NOTE: By default the capacity accessible when you connect the 2big Network 2 to your computer is 0 GB. This quota can be adjusted but it cannot be more than 500 GB (ex. for a 2big Network 2 with 2TB of storage, 500GB will be the maximum dedicated for access via USB) (see 4.7. Dashboard: Users for details). Fig. 26 Fig. 27 - Hi-Speed USB 2.0 cable ends Hi-Speed USB 2.0 Cables And Connectors See Fig. 27 for an illustration of the Hi-Speed USB 2.0 cable used to connect your LaCie 2big Network 2 to your computer. USB is a serial input/output technology for connecting peripheral devices to a computer or to each other. Your LaCie drive is shipped with a Hi-Speed USB cable to ensure maximum data transfer performance when connected to a Hi-Speed USB 2.0 port. The cable will also work when connected to a USB 1.1 port, but drive performance will be limited to USB 1.1 transfer rates.