Lacie 2big Network 2 User Manual - Page 63
Reset to Factory, - reset factory defaults
View all Lacie 2big Network 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
LaCie 2big Network 2 • DESIGN BY NEIL POULTON User Manual 4.19. Reset to Factory If for any reason you wish to reset your d2 Network 2 to its out-ofthe-box state, follow this procedure: CAUTION: Resetting the product will erase all Dashboard data such as users, groups, shares, and settings. CAUTION: After resetting to default, all files will be moved to a folder called Recovery in Share and so by default will be available only to the administrator. 1. Make sure to switch the Power Button to OFF. 2. Press and hold the blue front button. 3. While continuing to hold down the blue front button, switch the power button to ON. The front blue button will blink blue and red. 4. Continue to hold down the blue front button until the blue button is solid red. Release the blue front button. It will blink blue. 5. When the blinking stops, push (but don't hold the front blue button. The drive will reboot. Administering Your LaCie 2big Network 2 page 63