Lacie 2big Network 2 User Manual - Page 60
Installing a New Disk
View all Lacie 2big Network 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
LaCie 2big Network 2 • DESIGN BY NEIL POULTON User Manual Administering Your LaCie 2big Network 2 page 60 4.17.3. Installing a New Disk To remove a disk: 1. The drive tray may be locked. To unlock it, use the drawer key to turn the lock until the slot is vertical (Fig. 85). 2. Draw out the drive tray by inserting your finger into the space behind the drive tray handle and pulling to disengage the drive (Fig. 86). 3. Grasp the drive tray handle and carefully extract the drive (Fig. 87). To install a disk: Replacing a drive involves two main steps, installing the new drive and initializing the new disk on the Dashboard > RAID page (see below). CAUTION: After continuous use of the LaCie 2big Network 2, drives may be hot. Use caution when removing. 1. Carefully insert the drive tray into an empty drive bay. When the drive tray is most of the way in and you feel resistance, press the drive tray handle firmly until you feel the drive snap into place and the drive tray handle is flush with the back of the 2big. 2. Use the drawer key to lock the drive. 3. In the Dashboard > RAID page, you will see a message indicating that the system has recognized a new disk. Click the Claim button to continue. 4. The new disk will be added as a spare or as a part of a RAID array and will begin to rebuild. IMPORTANT INFO: In the event that an individual hard disk fails in the LaCie 2big Network 2, please contact your LaCie reseller or LaCie Customer Support. Please replace a defective hard drive only with a new drive provided by LaCie. Fig. 85 Fig. 86 Fig. 87