Lacie 5big Backup Server User Manual - Page 39
Disk Installation, Fig. 65
View all Lacie 5big Backup Server manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
LaCie 5big Backup Server Configuration Guide Remove a drive tray: If you are adding a non-LaCie disk to an empty slot in the 5big Backup Server, choose a drive tray that does not hold a drive. LaCie recommends inserting new drives in the order of the numbered slots, from left to right. For example, if the first slot on the left (Slot 1) contains the sole drive in the enclosure, choose the second slot from the left (Slot 2) for the next drive. See 6.1.1. Fastening a non-LaCie Hard Disk to a 5big Enclosure Drive Tray once you have removed an empty drive tray. 1. Use the included drive lock tool to unlock the drive tray. Turn the lock until it is vertical. (Fig. 65) o 2. Place your index finger into the space behind the handle. (Fig. 66) Fig. 65 3. Draw out the drive tray handle and carefully extract it. Please use caution when removing the drive tray. (Fig. 67). Insert a disk: 1. Make certain that the replacement or new drive is securely fastened to a drive tray. See 6.1.1. Fastening a non-LaCie Hard Disk to a 5big Enclosure Drive Tray if you are adding a nonLaCie drive. 2. Carefully insert the drive tray into the empty drive slot. You will feel resistance when the drive tray is most of the way in the bay. o Gently push the drive tray handle firmly until you feel the drive snap into place. The drive tray handle should be flush with the back of the 5big enclosure. Fig. 66 3. Use the drive lock tool to lock the drive in place. 4. The blue LED will continue to blink until the drive is added to the pool of Storage Hard Drives (see 6.2. Adding a new disk to the 5big Backup Server storage for instructions on how to add drives to Storage Hard Drives). If the disk LED does not blink, try the steps for inserting a disk once more. o Fig. 67 Disk Installation page 39