Lacie 5big Backup Server User Manual - Page 46

LaCie 5big Backup Server Configuration Guide 7.1.2. 5big Backup Server Recovery IMPORTANT INFO: As with most recovery operations, LaCie cannot guarantee that all files and settings will be restored. There is a very good chance that certain system settings, such as user and computer profiles, will have to be recreated. Add-in programs must be reinstalled after a recovery. 1. Make certain that all users and computers have logged off from the 5big Backup Server on the local network and, if applicable, from remote locations. 2. Turn off the 5big Backup Server by selecting Settings in the Con- Fig. 82 b sole (Fig. 82, a), followed by Shut Down (Fig. 82, b). 3. Once the 5big Backup Server has shut down, plug the USB 2.0 flash key into one of its four USB 2.0 ports (1.4.2. Rear View). 4. To boot the 5big Backup Server in recovery mode: ✦✦ Insert the pointed end of the drive lock tool into the system recovery button (1.4.2. Rear View). ✦✦ While pushing the system recovery button, turn on the 5big Backup Server by pushing the front LED button. ✦✦ Continue to push the system recovery button for two or three seconds. 5. The front LED blinks at a slower pace, indicating that it is booting from the recovery USB 2.0 flash drive. 6. Insert the 5big Backup Server Recovery DVD into a Windows workstation's optical disk drive. The workstation must be connected to the same network as the 5big Backup Server. Fig. 83 7. Go to Server Recovery DVD > Applications > Server Recovery. Launch Server Recovery. 8. Read the welcome page then click Next> (Fig. 83). 9. The Server Recovery will search for the 5big Backup Server on the network. Once it is found, click Next> (Fig. 84). If the 5big Backup Server is not found, please make certain that: ✦✦ The workstation and the 5big Backup Server are on the same network. ✦✦ The 5big Backup Server has booted from the USB recovery key. continued on the next page>> Fig. 84 Recovery page 46 a