Lenovo Q700 Lenovo IdeaCentre Q700 Hardware Maintenance Manual
Lenovo Q700 - IdeaCentre - 3015 Manual
UPC - 884942316395
View all Lenovo Q700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo Q700 manual content summary:
- Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 1
safety...4 Electrical safety...5 Safety inspection guide 7 Handling electrostatic discharge-sensitive devices 8 Grounding requirements 8 Safety notices...9 Chapter 3. General information 12 Specifications...12 Chapter 4. General Checkout 13 Problem determination tips 14 Chapter 5. Using - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 2
the hard disk drive 42 Replacing the TV tuner card 45 Replacing the wireless card 46 Replacing the motherboard 48 Replacing the Keyboard and Mouse 53 Replacing the power cable or power adapter 53 Replacing the remote control 54 Completing the installation 54 Chapter 8. Additional Service - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 3
service and reference information for Lenovo IdeaCentre Q computers listed on the cover. It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information. This manual includes a complete FRU part - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 4
- hard disk drive, system board, microprocessor, LCD, and memory) •• eSupport can be used to view the list of key commodities built in a particular machine serial. •• eSupport can be accessed at the following Web site: http://consumersupport.lenovo.com •• To view the key commodities: 1. Click Parts - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 5
to support Lenovo's requirements and schedule. Products sold in 2005, will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant parts. RoHS compliant Lenovo IdeaCentre Q parts have unique FRU part numbers - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 6
Maintenance Manual Safety information 2 This chapter contains the safety information that you need to be familiar with before servicing a in a hazardous position. •• Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine. •• Keep your tool - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 7
be hazardous to your eyes. •• After service, reinstall all safety shields, guards, power cords, telecommunication systems, networks, and modems before you open the server/workstation covers, unless instructed power before: - Performing a mechanical inspection - Working near power supplies - Removing - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 8
is conductive; such touching can cause personal injury and machine damage. •• Do not service the following parts with the power on when they are removed from their normal operating places in a machine: - Power supply units - Pumps - Blowers and fans - Motor generators and similar units. (This - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 9
users and service personnel from injury. This guide problem. Consider these conditions and the safety hazards they present: •• Electrical hazards, especially primary power power cord should be the appropriate type as specified in the parts listings. c. Insulation must not be frayed or worn. 4. Remove - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 10
Hardware Maintenance Manual Handling electrostatic discharge-sensitive devices Any computer part containing transistors or integrated circuits , such as those listed below, to provide protection that meets the specific service requirement. Note: The use of a grounding system is desirable but not - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 11
attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed power cords to outlet. 5. Turn device ON. To Disconnect 1. Turn everything OFF. 2. First, remove power cords from outlet. 3. Remove signal cables from connectors. 4. Remove - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 12
(such as CD-ROMs, DVD-ROM drives, fiber optic devices, or transmitters) are installed, note the following: •• Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •• Use of controls - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 13
off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. 2 1 CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 14
Manual General information 3 This chapter provides general information that applies to all machine types supported by this publication. Specifications This section lists the physical specifications for your computer. Type Lenovo IdeaCentre Q This section lists the physical specifications - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 15
The drives in the computer you are servicing might have been rearranged or the drive startup BIOS is installed on the system. A down-level BIOS might cause false errors and unnecessary replacement of the system board. Use the following procedure to help determine the cause of the problem: 1. Power - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 16
, use the following information to assist you in problem determination. If possible, have this information available when requesting assistance from Service Support and Engineering functions. •• Machine type and model •• Processor or hard disk upgrades •• Failure symptom - Do diagnostics indicate - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 17
Chapter 4. General Checkout Comparing the configuration and software set-up between "working and non-working" systems will often lead to problem resolution. 15 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 18
Hardware Maintenance Manual Using the Setup Utility 5 The Setup Utility program is used to and release the F1 key rather than leaving it pressed when turning on the computer. b. If a Power-On Password or an administrator password has been set, the Setup Utility program menu is not displayed until - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 19
types of passwords are available: • Administrator Password • Power-On Password You do not have to set any symbols. For security reasons, it is a good idea to use a strong password that cannot be easily program and hard disk drive passwords are not case sensitive • Not be your name or your user name - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 20
Hardware Maintenance Manual Setting, changing, and deleting a Administrator password To set, change, or that changes have been saved. 3. Select Exit. 4. Select Save changes and Exit. Power-On Password When a Power-On Password is set, you cannot start the Setup Utility program until a valid password - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 21
installed. To delete a previously set Power-On Password, do the following : 1. From the Security menu, select Set Power-On Password and press Enter. 2. The select Discard changes and Exit.You can set others such as ATA Drives Setup , Video Setup , Audio Setup , Network Setup , CIR Setup . See the - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 22
Hardware Maintenance Manual Selecting a startup device If your computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use one of the following procedures to select a startup device. Selecting a temporary startup device Use this procedure to startup - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 23
Chapter 5. Using the Setup Utility Exiting from the Setup Utility program When you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you might have to press Esc several times). If you want to save the new settings, select Save changes and Exit before you - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 24
FRUs to have available when servicing a computer. If you are unable to correct the problem using this index, go to "Undetermined problems" on page 27. Notes of your error symptoms in the first part of this index. Hard disk drive boot error A hard disk drive boot error (error codes 1962 and I999030X - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 25
the following: 1. Attempt to back-up the data on the failing hard disk drive. 2. Using the operating systems programs format the hard disk drive. Replace the hard disk drive. Power Supply Problems If you suspect a power problem, use the following procedures. Check/Verify FRU/Action Check the - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 26
Slave could not be found or initialized. Make sure the hard drive is correctly installed. Keyboard not found Cannot initialize the keyboard. to Enable. The BIOS then ignores the missing keyboard during POST. System Halted The system has been halted. A reset or power cycle is required to - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 27
External Cache f. External Cache RAM g. Hard disk drive h. Diskette drive 3. Power-on the computer to re-test the system. 4. Repeat steps 1 through 3 until you find the failing device or adapter. If all devices and adapters have been removed, and the problem continues, replace the system board. 25 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 28
in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at: http://consumersupport.lenovo.com. Note Use only parts provided by Lenovo. General information Pre-disassembly instructions Before proceeding with the - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 29
the computer cover. To remove the computer cover: 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, turn off all attached devices, and the computer. 2. Unplug all power cords from electrical outlets. 3. Disconnect all cables attached to the - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 30
Hardware Maintenance Manual 6. Remove the stand from the computer. 28 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 31
Chapter 7. Replacing hardware 7. Remove the two screws that secure the bracket to the chassis. 8. Remove the plastic bracket. 29 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 32
Hardware Maintenance Manual 9. Pull up the two pieces of computer cover. 10. Remove both computer cover pieces. 30 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 33
Chapter 7. Replacing hardware Removing the front bezel To remove the front bezel: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the front bezel by releasing the four plastic tabs inside the chassis and push the bezel outward as shown. 3. To reinstall the bezel, - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 34
Hardware Maintenance Manual Replacing the memory module To remove the computer cover: 1. Remove the computer cover. Refer to "Removing the computer cover". Note For this procedure, it helps to lay the computer on its side. 2. Locate the memory module sockets. Refer to "Locating components - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 35
Chapter 7. Replacing hardware 4. Align and then insert the new memory module into socket and push down on the top edge of the memory module . Make sure the latches lock the memory module in place. 2 2 1 5. Install the computer cover. Refer to "Completing the installation". 33 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 36
Hardware Maintenance Manual Replacing the optical disk drive To replace the optical disk drive: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the front bezel. Refer to "Removing the front bezel". 3. Remove the screw that secures the optical drive on the chassis. 4. - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 37
very hot when the system is on. Never touch the heat sink with any metal or with your hands. To replace the CPU heat sink: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Loosen the four screws that secure the CPU heat sink to the motherboard. 1 2 4 3 35 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 38
Hardware Maintenance Manual 3. Pull the heat sink out from the CPU. 4. Place the heat sink upside down on a flat surface sink on the CPU, aligning the four screws in the heat sink with the screw sockets in the motherboard. 6. Install the computer cover. Refer to "Completing the installation". 36 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 39
hardware Replacing the CPU To replace the CPU 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the CPU heat sink. Refer to steps 2 to 4 of the "Replacing the CPU heat sink" section. 3. Lift the small handle and open the retainer . Attention Do not touch the gold - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 40
Hardware Maintenance Manual 4. Lift the microprocessor straight up and out of the socket. Notes a. Note the orientation of the notches on the microprocessor. This is important when reinstalling the new microprocessor on the motherboard. b. Do not drop anything onto the microprocessor socket while it - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 41
Replacing hardware 5. Make sure that the microprocessor retainer is fully open. 6. Holding the microprocessor with your fingers, remove the protective cover that protects the gold contacts on the new into the socket. 8. Lower the microprocessor straight down into its socket on the motherboard. 39 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 42
Hardware Maintenance Manual 9. To secure the microprocessor in the Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the CPU heat sink. Refer to steps 2 to 4 of the "Replacing the CPU heat sink" section. 3. Disconnect the system fan cables from the motherboard and remove - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 43
the chassis. 6. Insert and tighten the eight screws to secure the system fans. 7. Connect the system fan cables to the motherboard. 8. Install the CPU heat sink on the motherboard. Refer to step 5 of the "Replacing the CPU heat sink" section. 9. Install the computer cover. Refer to "Completing the - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 44
Hardware Maintenance Manual Replacing the hard disk drive To replace the hard disk drive: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the two screws that secure the drive carrier to the chassis. 42 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 45
Chapter 7. Replacing hardware 3. Pull the drive carrier up and slide it out of the chassis. 43 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 46
Hardware Maintenance Manual 4. Remove the four screws that secure the hard disk drive to the drive carrier. 5. Slide the hard disk drive out of the drive carrier. 44 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 47
the new hard disk drive into the drive carrier. (2) Screw in the four screws on the drive carrier. 7. Screw in the hard disk drive carrier to the chassis. 8. Install the computer cover. Refer to "Completing the installation". Replacing the TV tuner card To replace the TV tuner card: 1. Remove the - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 48
the antenna cable to the TV tuner card. 9. Install the computer cover. Refer to "Completing the installation". Replacing the wireless card To replace the wireless card: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Locate the wireless card. Refer to "Locating components - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 49
Chapter 7. Replacing hardware 4. Remove the two screws that secure the wireless card to the motherboard. 5. Detach the wireless card from the wireless card socket. 47 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 50
the front bezel. Refer to "Removing the front bezel". 7. Remove the optical disk drive. Refer to step 3 of the "Replacing the optical disk drive" section. 8. Remove the TV tuner card. Refer to steps 3 to 5 of the "Replacing the TV tuner card" section. 9. Remove the wireless card. Refer to steps 3 to - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 51
Chapter 7. Replacing hardware 10. Remove the three screws that secure the metal bracket to the motherboard. 11. Pull the metal bracket out of the chassis. 49 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 52
Hardware Maintenance Manual 50 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 53
Chapter 7. Replacing hardware 12. Remove the five screws that secure the motherboard to the chassis. 51 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 54
Hardware Maintenance Manual 13. Pull the motherboard out of the chassis. 14. Place the new motherboard into the chassis, aligning the screw holes in the motherboard with the mounting holes in the chassis. 15. Screw the five screws on the new motherboard back in. 16. Align the screw holes in the - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 55
and connect the new keyboard or mouse cable to the same port. Replacing the power cable or power adapter To replace the power cable and power adapter: 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, and turn off all attached devices and the - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 56
Manual Replacing the remote control Note: Remove the batteries from a non-working remote control before you return it to Lenovo for a replacement. Completing the installation After replacing the parts, you need to close the computer cover and reconnect the cables, including telephone lines and power - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 57
Chapter 7. Replacing hardware 4. Carefully install the cover as shown, until it securely snaps into place. 5. Install the plastic bracket. 6. Reconnect the external cables and power cords into the computer. Refer to "Locating components and ports/sockets". 55 - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 58
that the service representative might find helpful. Power management Power management reduces the power consumption of certain components of the computer such as the system power supply, processor, hard disk drives, and some monitors. Automatic configuration and power interface (ACPI) BIOS Being an - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 59
according to the instructions and requirements described in the manuals included with your computer. Lenovo will not assume responsibility for any loss incurred except those resulting from installation or operations carried out by Lenovo professional service staff. Lenovo has made every attempt - Lenovo Q700 | Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 60
product and the manuals included with your computer. For the latest information or if you have any questions or comments, please visit the consumer support website at: http://consumersupport.lenovo.com. Lenovo is a registered trademark of Lenovo. Microsoft, Windows, and Windows Vista are trademarks
Contents
i
Contents
Chapter 1. About this manual
................................................
1
Important
Safety Information
......................................................................
1
Using eSupport
....................................................................................................
2
Important information about replacing RoHS compliant FRUs ..2
Chapter 2. Safety information
................................................
4
General safety
.......................................................................................................
4
Electrical safety
....................................................................................................
5
Safety inspection guide
...................................................................................
7
Handling electrostatic discharge-sensitive devices
.........................
8
Grounding requirements
...............................................................................
8
Safety notices
........................................................................................................
9
Chapter 3. General information
...........................................
12
Speciļ¬cations
.....................................................................................................
12
Chapter 4. General Checkout
...............................................
13
Problem determination tips
......................................................................
14
Chapter 5. Using the Setup Utility
......................................
16
Starting the Setup Utility program
.........................................................
16
Viewing and changing settings
................................................................
16
Using passwords
..............................................................................................
17
Using Device
......................................................................................................
19
Selecting a startup device
...........................................................................
20
Exiting from the Setup Utility program
................................................
21