Lenovo Q700 Lenovo IdeaCentre Q700 Hardware Maintenance Manual - Page 42
Replacing the system fan
UPC - 884942316395
View all Lenovo Q700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Hardware Maintenance Manual 9. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. 10. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 11. Install the CPU heat sink on the motherboard. Refer to step 5 of the "Replacing the CPU heat sink" section. 12. Install the computer cover. Refer to "Completing the installation". Replacing the system fan To replace the system fan: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the CPU heat sink. Refer to steps 2 to 4 of the "Replacing the CPU heat sink" section. 3. Disconnect the system fan cables from the motherboard and remove the eight screws that secure the system fans to the chassis. 40