Lenovo ThinkPad T410 Hardware Maintenance Manual - Page 80
Keyboard, When installing, Removal steps of keyboard
View all Lenovo ThinkPad T410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
When installing: Plug the red cable into the jack labeled MAIN, and the blue cable into the jack labeled AUX on the card. If the computer you are servicing is a wireless WAN-ready model and does not have a wireless WAN card, route the antenna cables and secure them with a tape as shown in the following figure. 1080 Keyboard For access, remove these FRUs in order: • "1010 Battery pack" on page 66 • "1050 DIMM slot cover" on page 70 Removal steps of keyboard 1 Step 1 Screw (quantity) M2 × 10 mm, wafer-head, nylon-coated (1) 74 Hardware Maintenance Manual Color Black Torque 0.181 Nm (1.85 kgfcm)
When installing:
Plug the red cable into the jack labeled
MAIN
, and the blue cable into the jack labeled
AUX
on the card.
If the computer you are servicing is a wireless WAN-ready model and does not have a wireless WAN card,
route the antenna cables and secure them with a tape as shown in the following figure.
1080 Keyboard
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 66
•
“1050 DIMM slot cover” on page 70
Removal steps of keyboard
1
Step
Screw (quantity)
Color
Torque
1
M2 × 10 mm, wafer-head, nylon-coated (1)
Black
0.181 Nm
(1.85 kgfcm)
74
Hardware Maintenance Manual