Lenovo ThinkPad W530 Hardware Maintenance Manual - Page 47

Error messages, Beep symptoms, Table 1. Numeric error codes continued, Table 2. Error messages - memory install

Get Lenovo ThinkPad W530 PDF manuals and user guides View all Lenovo ThinkPad W530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Table 1. Numeric error codes (continued) Symptom or error 2111: Read error on HDD1 (Ultrabay HDD) 2112: Read error on HDD2 (Mini SATA) 2200: Machine Type and Serial Number are invalid. 2201: Machine UUID is invalid. FRU or action, in sequence 1. Reseat the hard disk drive. 2. Ultrabay hard disk drive 3. System board 1. Reseat the Mini SATA device. 2. Mini SATA device 3. System board System board System board Error messages Table 2. Error messages Symptom or error Fan error. Thermal sensing error. The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system. Press the ESC key to continue. FRU or action, in sequence 1. Fan 2. Thermal grease 3. System board System board Replace the battery. Beep symptoms Table 3. Beep symptoms Symptom or error Four cycles of four short beeps Five short beeps, pause, and five more short beeps One short beep, pause, three short beeps, pause, three more short beeps, pause, and one short beep Three short beeps, pause, one short beep, pause, one more short beep, pause, and three short beeps Five short beeps One long and two short beeps FRU or action, in sequence System board System board 1. Memory module 2. System board Remove the installed PCI devices. System board System board No-beep symptoms Table 4. No-beep symptoms Symptom or error No beep, power-on indicator on, LCD blank, and no POST. No beep, power-on indicator on, and LCD blank during POST. FRU or action, in sequence 1. Make sure that every connector is connected tightly and correctly. 2. Memory module 3. System board 1. Reseat the memory module. 2. System board Chapter 4. Related service information 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Table 1. Numeric error codes (continued)
Symptom or error
FRU or action, in sequence
2111: Read error on HDD1 (Ultrabay HDD)
1.
Reseat the hard disk drive.
2. Ultrabay hard disk drive
3. System board
2112: Read error on HDD2 (Mini SATA)
1.
Reseat the Mini SATA device.
2. Mini SATA device
3. System board
2200: Machine Type and Serial Number are invalid.
System board
2201: Machine UUID is invalid.
System board
Error messages
Table 2. Error messages
Symptom or error
FRU or action, in sequence
Fan error.
1.
Fan
2. Thermal grease
3. System board
Thermal sensing error.
System board
The battery installed is not supported by this system
and will not charge. Please replace the battery with the
correct Lenovo battery for this system. Press the ESC
key to continue.
Replace the battery
.
Beep symptoms
Table 3. Beep symptoms
Symptom or error
FRU or action, in sequence
Four cycles of four short beeps
System board
Five short beeps, pause, and five more short beeps
System board
One short beep, pause, three short beeps, pause, three
more short beeps, pause, and one short beep
1.
Memory module
2. System board
Three short beeps, pause, one short beep, pause, one
more short beep, pause, and three short beeps
Remove the installed PCI devices.
Five short beeps
System board
One long and two short beeps
System board
No-beep symptoms
Table 4. No-beep symptoms
Symptom or error
FRU or action, in sequence
No beep, power-on indicator on, LCD blank, and no
POST.
1.
Make sure that every connector is connected
tightly and correctly
.
2. Memory module
3. System board
No beep, power-on indicator on, and LCD blank during
POST.
1.
Reseat the memory module
.
2. System board
Chapter 4
.
Related service information
41