Lexmark 26C0000 User Manual - Page 138
Using the Embedded Web Server, Setting up e-mail alerts, Configuring supply notifications, Settings
View all Lexmark 26C0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Using the Embedded Web Server If the printer is installed on a network, the Embedded Web Server is available for a range of functions: • Configuring printer settings • Checking the status of the printer supplies • Configuring network settings • Viewing reports • Restoring the factory default settings • Viewing the virtual display • Setting Web page password protect • Setting Panel PIN protect • Setting the date and time To access the Embedded Web Server: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click one of the tabs to access information about the printer, change settings, or view a report. Note: If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh to access printer menus. Setting up e-mail alerts You can have the printer send you an e-mail when the supplies are getting low or when the paper needs to be changed, added, or unjammed. To set up e-mail alerts: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click Settings. 3 Under Other Settings, click E-mail Alert Setup. 4 Select the items for notification and type in the e-mail addresses that you want to receive e-mail alerts. 5 Click Submit. Note: See your system support person to set up the e-mail server. Configuring supply notifications You can determine how you would like to be notified when supplies run low or reach their end-of-life. Administrative support 138