Lexmark 26C0000 User Manual - Page 144
Multipurpose feeder, Memory card, Solving paper feed problems, Paper frequently jams
View all Lexmark 26C0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Multipurpose feeder CHECK THE MULTIPURPOSE FEEDER Make sure the 650-sheet duo drawer (multipurpose feeder) is installed properly. CLEAR ANY JAMS Clear any jams in the multipurpose feeder. CHECK THE POWER CORD CONNECTION Make sure: • The power cord is plugged into the printer and a properly grounded electrical outlet. • The outlet has power. CHECK THE PAPER Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines. CHECK THE PAPER GUIDES Move the guides in the tray to the correct position for the size loaded. CHECK FOR SERVICE MESSAGES If a service message appears, turn the printer off, wait about 10 seconds, and then turn the printer back on. If the error recurs, call for service. Memory card Make sure the memory card is securely connected to the printer system board. Solving paper feed problems Paper frequently jams These are possible solutions. Try one or more of the following: CHECK THE PAPER Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines. MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder. Troubleshooting 144