Lexmark 26C0000 User Manual - Page 146
Blank s, Characters have jagged or uneven edges, Performing Self Test, Config Menu
View all Lexmark 26C0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
3 From the printer control panel, press and hold and the right arrow button while turning the printer on. 4 Release both buttons when Performing Self Test appears. The printer performs its power-on sequence, and then Config Menu appears. 5 Press the arrow buttons until Prt Quality Pgs appears, and then press . The pages are formatted. Printing Quality Test Pages appears, and then the pages print. The message remains on the display until all the pages print. 6 After the print quality test pages print, press the arrow buttons until Exit Config Menu appears, and then press . Blank pages The printer may need to be serviced. For more information, contact Customer Support. Characters have jagged or uneven edges These are possible solutions. Try one or more of the following: CHECK THE PRINT QUALITY SETTINGS • Change the Print Resolution setting in the Quality menu to 600 dpi, 1200 Image Q, 1200 dpi, or 2400 Image Q. • Enable Enhance Fine Lines in the Quality menu. MAKE SURE DOWNLOADED FONTS ARE SUPPORTED If you are using downloaded fonts, then verify that the fonts are supported by the printer, the host computer, and the software program. Troubleshooting 146