Lexmark C530DN User's Guide

Lexmark C530DN - C 530dn Color Laser Printer Manual

Get Lexmark C530DN - C 530dn Color Laser Printer PDF manuals and user guides
UPC - 734646030908
View all Lexmark C530DN manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark C530DN manual content summary:

  • Lexmark C530DN | User's Guide - Page 1
    , and C534 User's Guide July 2006 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. All other trademarks are the property of their respective owners. © 2006 Lexmark International, Inc All
  • Lexmark C530DN | User's Guide - Page 2
    service person. This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. Lexmark operating instructions that before touching. CAUTION: The printer weighs 25.40 kg (56
  • Lexmark C530DN | User's Guide - Page 3
    card ...18 Installing a flash memory or firmware card 21 Installing a printer hard disk...22 Installing an internal print server or port interface card manual feeder...33 Using the standard exit bin...34 Setting the Paper Size and Paper Type 35 Tray linking...36 Paper and specialty media guide
  • Lexmark C530DN | User's Guide - Page 4
    Supported paper sizes, types, and weights 41 Supported paper sizes...41 Support for paper types ...43 Paper types and weights ...43 Paper capacities ...44 Printing...45 Installing printer job manually from a Macintosh computer 50 Printing only black text and graphics 50 Configuring the printer for
  • Lexmark C530DN | User's Guide - Page 5
    65 Clearing jams in the multipurpose feeder 67 Clearing jams in the manual feeder 68 Maintaining the printer 69 Storing supplies...69 Checking the status of supplies...69 Conserving supplies...69 Aligning the toner cartridges...69 Cleaning the printhead lenses...70 Ordering supplies...70 Ordering
  • Lexmark C530DN | User's Guide - Page 6
    Troubleshooting...82 Checking an unresponsive printer...82 Solving printing problems...82 Multiple-language PDFs do not Print irregularities...91 Print is too dark...91 Transparency print quality is poor ...91 Toner fog or background shading appears on the page 91 Gray background ...92 Uneven print
  • Lexmark C530DN | User's Guide - Page 7
    pages...93 Solid color pages ...93 Paper curl ...94 Toner specks ...94 Toner rubs off ...94 Solving color quality problems...95 Quality menu ...95 Frequently Asked Questions (FAQ) about color printing 97 Contacting Customer Support...100 Notices...102 Power consumption...105 Index...108 Contents 7
  • Lexmark C530DN | User's Guide - Page 8
    8
  • Lexmark C530DN | User's Guide - Page 9
    Configured models Basic models The following illustrations show the basic printer models. C532n 1 2 5 4 3 1 Standard exit bin 2 Control panel 3 Standard 250-sheet tray (Tray 1) 4 Manual feeder 5 Tray 1 handhold C530dn, C532dn. C534n, C534dn 1 2 5 4 3 6 1 Standard exit bin
  • Lexmark C530DN | User's Guide - Page 10
    -sheet tray (Tray 1) 4 Tray 1 handhold 5 Multipurpose feeder latch 6 Multipurpose feeder Fully configured model The following illustration shows the fully configured printer model. Not all models can be fully configured by adding an optional 550-sheet drawer. Using the security lock feature
  • Lexmark C530DN | User's Guide - Page 11
    , such as Ready. • Supplies messages-Provide information about supplies, such as Toner Low. • Show-me screens-Provide instructions for resolving common printer errors. These screens are only available when the printer detects an error code. Pressing initiates action on a menu item. 3 Navigation
  • Lexmark C530DN | User's Guide - Page 12
    available under each menu. Note: Some menu items may not be available based on the printer model or the options installed. Supplies Menu Replace Supply Cyan Cartridge Magenta Cartridge Yellow Cartridge Black Cartridge Cyan PC Unit Magenta PC Unit Yellow PC Unit Black PC Unit Fuser Transfer Belt
  • Lexmark C530DN | User's Guide - Page 13
    Network/Ports TCP/IP IPv6 Wireless Standard Network Network Standard USB USB NetWare AppleTalk LexLink USB Direct Help Color Quality Print Quality Printing Guide Supplies Guide Media Guide Print Defects Menu Map Information Guide Connection Guide Moving Guide Learning about the printer 13
  • Lexmark C530DN | User's Guide - Page 14
    at least two people to lift it safely. Use the handholds on the sides of the printer to lift it, and make sure your fingers are not under the printer when you set it down. The printer supports one optional drawer which allows an additional 550 sheets of paper to be loaded. CAUTION: If
  • Lexmark C530DN | User's Guide - Page 15
    continuing. If you have any other devices attached to the printer, turn them off as well and unplug any cables going to the printer. You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this section explain how to install the available cards
  • Lexmark C530DN | User's Guide - Page 16
    Note: Before attempting to access the system board, see "Using the security lock feature" on page 10 and verify there is no security lock on the system board cover. 1 Notice the eight screws located on the metal plate. Turn the screws counterclockwise until they are loose. Do not remove the screws.
  • Lexmark C530DN | User's Guide - Page 17
    3 Pull the metal plate forward to remove it. 4 Use the illustration to locate the connector for the card being installed. 1 4 2 3 1 Memory card connector 2 Internal print server connector 3 Hard disk connector 4 Firmware and flash memory card connectors Installing options 17
  • Lexmark C530DN | User's Guide - Page 18
    card The system board has one connector for an optional memory card. CAUTION: If you are installing a memory card after setting up the printer, turn the printer off, and unplug the power cord before continuing. 1 Access the system board. 2 Open both latches on the connector completely. 3 Unpack the
  • Lexmark C530DN | User's Guide - Page 19
    2 1 1 Notches 2 Ridges 5 Push the memory card straight into the connector until it snaps into place. Make sure each latch fits over the notch located on either side of the memory card. Installing options 19
  • Lexmark C530DN | User's Guide - Page 20
    the system board access cover. 7 Set the printer software to recognize the memory card. a Click Start ΠSettings ΠPrinters. b Double-click the printer icon. c Click File ΠProperties. d Click the Install Options tab. e Increase the printer memory to the appropriate number. f Click OK. Installing
  • Lexmark C530DN | User's Guide - Page 21
    each may be installed, but the connectors are interchangeable. CAUTION: If installing a flash memory or firmware card after setting up the printer, turn the printer off, and unplug the power cord before continuing. 1 Access the system board. For more information, see "Accessing the system board to
  • Lexmark C530DN | User's Guide - Page 22
    is needed to attach the hard disk to the mounting plate. Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before touching a disk. Note: If an option card has been installed, you may need to remove it before installing the hard disk. 1 Access the
  • Lexmark C530DN | User's Guide - Page 23
    4 Attach the ribbon cable to the hard disk. 5 Align the screw holes on the mounting plate with the holes in the hard disk. 6 Secure the mounting plate to the hard disk with the screws. 7 Press the ribbon cable connector into the connector on the system board. 8 Flip the hard disk over, and then
  • Lexmark C530DN | User's Guide - Page 24
    the system board to install internal options" on page 15. 2 Unpack the internal print server or port interface card. 3 Locate the two screws on the printer that attach the metal plate to the connector slot. Remove and save the two screws. 4 Remove the metal plate covering the connector slot and save
  • Lexmark C530DN | User's Guide - Page 25
    Reinstalling the system board access cover Note: This operation requires a #2 Phillips screwdriver. 1 Align and place the eight keyholes on the system board metal plate onto the screws on the system board. 2 Slide the metal plate down. Installing options 25
  • Lexmark C530DN | User's Guide - Page 26
    or an Ethernet cable. A USB port requires a USB cable. Be sure to match the USB symbol on the cable with the USB symbol on the printer. Match the appropriate cable with the connector shown: 2 1 1 Ethernet connector 2 USB symbol 3 USB connector 3 Installing options 26
  • Lexmark C530DN | User's Guide - Page 27
    Loading the standard tray The printer has two trays to select paper loading prevents jams and facilitates trouble-free printing. Do not remove guide tabs together as shown, and move the width guide to the side of the tray. 3 Squeeze the length guide tabs together as shown, and slide the length guide
  • Lexmark C530DN | User's Guide - Page 28
    stack toward the back of the tray as shown. When loading preprinted letterhead, place the header toward the front of the tray. 6 Squeeze the width guide tabs, and slide the width guide to lightly touch the side of the stack. Loading paper and specialty media 28
  • Lexmark C530DN | User's Guide - Page 29
    the 550-sheet tray is loaded for the first time or when a new size is loaded, remove the tray completely from the support unit. 2 3 1 4 1 Width guide tabs 2 Size indicators 3 Length guide tabs 4 Size indicators Note: If the same paper size is loaded again, the tray does not need to be completely
  • Lexmark C530DN | User's Guide - Page 30
    Loading the multipurpose feeder 1 Push the multipurpose feeder latch to the right. 2 Pull the multipurpose feeder door down. 3 Grasp the extension, and then pull it straight out until it is fully extended. Loading paper and specialty media 30
  • Lexmark C530DN | User's Guide - Page 31
    limiter and tab. Note: Do not exceed the maximum stack height by forcing paper under the stack height limiter. 4 3 2 1 1 Stack height limiter 2 Size indicators 3 Width guide 4 Tab Loading paper and specialty media 31
  • Lexmark C530DN | User's Guide - Page 32
    adjust the width guide to lightly touch coated linings, or self-stick adhesives. These envelopes may severely damage the printer. 7 Make sure the paper is as far into the multipurpose feeder is printing. For information about supported paper sizes and types, see the section about paper and specialty
  • Lexmark C530DN | User's Guide - Page 33
    To achieve the best possible print quality, use only high-quality paper designed for laser printers. • To prevent jams, do not add paper to the manual feeder while a job is printing. For information about supported paper sizes and types, see the section about paper and specialty media. Loading paper
  • Lexmark C530DN | User's Guide - Page 34
    to 250 sheets of 20 lb paper. It collects print jobs facedown. The standard exit bin collects every type of paper and specialty media the printer supports. For more information, see "Paper and specialty media guide" on page 37. Attaching the standard exit bin To attach the standard exit bin to the
  • Lexmark C530DN | User's Guide - Page 35
    its closed position. Setting the Paper Size and Paper Type Note: Trays with matching Paper Size and Paper Type settings are automatically linked by the printer. When a linked tray runs out of paper, the printer draws from another tray. Loading paper and specialty media 35
  • Lexmark C530DN | User's Guide - Page 36
    the next linked tray. For example, if Trays 1 and 2 are linked, once Tray 1 is empty, the printer will use paper from Tray 2 to finish printing. Once the selected trays are loaded with same size and type of see the Paper menu table in the Menus and Messages Guide. Loading paper and specialty media 36
  • Lexmark C530DN | User's Guide - Page 37
    its edges. Excessive curl can cause media feeding problems. Curl can occur after the media passes through the printer, where it is exposed to high temperatures. and can cause feeding problems. Smoothness Media smoothness directly affects print quality. If media is too rough, toner cannot fuse to it
  • Lexmark C530DN | User's Guide - Page 38
    media Using appropriate media prevents jams and helps ensure trouble-free printing. To help avoid jams and poor print inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based generally meet these requirements; latex inks printers. Paper and specialty media guide 38
  • Lexmark C530DN | User's Guide - Page 39
    . • To prevent print quality problems, avoid getting fingerprints on the Lexmark part number 12A8240 for letter-size and Lexmark manual feeder" on page 33. When printing on envelopes: • From the control panel, set the Paper Source based on the source in use. From the control panel, the printer guide 39
  • Lexmark C530DN | User's Guide - Page 40
    Guide available on the Lexmark Web site at www.lexmark.com/publications. Note: Vinyl labels are not supported on this product. Use only paper labels. When printing on labels: • From the printer printer and the cartridge with adhesive, and could void the printer and cartridge leading and driver edge,
  • Lexmark C530DN | User's Guide - Page 41
    may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer. • Use grain Guide Supported paper sizes -supported X-unsupported Paper size Dimensions Standard 250-sheet Optional 550-sheet Multipurpose tray (Tray 1) tray (Tray 2) feeder or manual
  • Lexmark C530DN | User's Guide - Page 42
    355.6 mm (8.5 x 14 in.) (Multipurpose feeder) 76.2 x 152.4 mm X X (3 x 6 in.) to 215.9 x 355.6 mm (Manual feeder) (8.5 x 14 in.) 7 3/4 Envelope 98.4 x 190.5 mm X X (Monarch) (3.875 x 7.5 in.) Commercial 9 98.4 x 225.4 .7 x 210 mm (5.50 x 8.27 in.). Paper and specialty media guide 42
  • Lexmark C530DN | User's Guide - Page 43
    supported. Paper types and weights Optional 550-sheet Multipurpose tray (Tray 2) feeder or manual feeder or (Tray 1) (Tray 2) manual feeder Plain (xerographic or business) paper (pressure-sensitive area) must enter the printer first. 4 Vinyl labels are not supported. 5 Use sulfite, wood-free,
  • Lexmark C530DN | User's Guide - Page 44
    g/m2 (35 lb bond) 4 131 g/m2 (35 lb bond) Multipurpose feeder or manual feeder Index Bristol-120 g/m2 (67 lb) Tag-120 g/m2 (74 lb) Cover- 3 The label area (pressure-sensitive area) must enter the printer first. 4 Vinyl labels are not supported. 5 Use sulfite, wood-free, or up to 100% media guide 44
  • Lexmark C530DN | User's Guide - Page 45
    print. Installing printer software A printer driver is software that lets the computer communicate with the printer. The printer software is typically installed during the initial printer setup. For more information, see the Setup sheet or Setup Guide that shipped with the printer or click Install
  • Lexmark C530DN | User's Guide - Page 46
    , Repeat, or Verify), and then assign a user name. For a confidential job, also enter a four-digit PIN. 5 Click OK or Print, and then go to the printer to release the job. 6 From the control panel, press until Held jobs appears, and then press . 7 Press until appears next to your user name, and
  • Lexmark C530DN | User's Guide - Page 47
    and approved for use with the printer. For more information, see the Lexmark Web site at www.lexmark.com. Notes: • USB devices must be compatible with the USB 2.0 standard. • Hi-Speed USB devices must support the Full-Speed standard as well. Devices only supporting USB low-speed capabilities are not
  • Lexmark C530DN | User's Guide - Page 48
    flash memory device as held jobs. Printing a menu settings page Print a menu settings page to review the current menu settings and to verify printer options are installed correctly. 1 Make sure the printer is on and Ready appears. 2 From the control panel, press . 3 Press until Reports appears, and
  • Lexmark C530DN | User's Guide - Page 49
    be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page. list To print samples of the fonts currently available for your printer: 1 Make sure the printer is on and Ready appears. 2 From the control panel,
  • Lexmark C530DN | User's Guide - Page 50
    print quality problems. 1 Turn the printer off. 2 Hold down and while turning the printer on. 3 Printer appears briefly, followed by a clock, and then Ready appears. Printing a duplex job manually from with black toner only for an extended period, set the printer to Color Lock Out mode,
  • Lexmark C530DN | User's Guide - Page 51
    , cool, dark, dry place where the photoconductors will not be touched or scratched. Configuring the printer for black-only printing 1 Turn the printer off. 2 From the control panel, hold down and while turning the printer on. 3 Release the buttons when the clock appears, and wait for CONFIG MENU to
  • Lexmark C530DN | User's Guide - Page 52
    2 Open the upper door fully. Grasp the inner door handle and pull to open both the inner and lower doors. Now the photoconductors can be seen. 1 2 3 Lift the photoconductor release knob, and then pull the photoconductor out by the handle. Remove all three color photoconductors. 4 Wrap each
  • Lexmark C530DN | User's Guide - Page 53
    6 Close the box to protect the photoconductors from light. 7 Lift the small toner cartridge handles slightly and pull straight out. Remove all three color toner cartridges. 8 Place the toner cartridges in a clean, sturdy box. 9 Close the lower door. Printing 53
  • Lexmark C530DN | User's Guide - Page 54
    color printing and replacing the color supplies To return to color printing, complete the following steps: 1 Turn the printer off. 2 From the control panel, hold down and while turning the printer on. 3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear. Locate the color
  • Lexmark C530DN | User's Guide - Page 55
    or defective Cyan cartridge 31 Missing or defective Magenta cartridge 31 Missing or defective Yellow cartridge Canceling a print job print, a small printer icon appears in the right corner of the taskbar. 1 Double-click the printer icon. A list of print jobs appears in the printer window. 2 Select
  • Lexmark C530DN | User's Guide - Page 56
    trash icon. Canceling a print job from Mac OS X 1 Choose Applications ΠUtilities, and then double-click Print Center or Printer Setup Utility. 2 Double-click the printer you are printing to. 3 From the printer window, select the job to cancel. 4 From the icon bar at the top of the window, click the
  • Lexmark C530DN | User's Guide - Page 57
    , see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications. • For detailed information about manual feeder while the printer is printing. Wait for Load manual feeder with to appear. • Push all trays in firmly after loading media. • Make sure the guides
  • Lexmark C530DN | User's Guide - Page 58
    203 203 202 230 201 250 200 241 200 242 Accessing jam areas Open doors and covers, and remove trays to access jam areas. The illustration shows the possible jam areas. 1 2 7 3 1 Upper door 2 Fuser cover 3 Inner door 4 Lower door 5 Standard tray (Tray 1) 4 6 5 Clearing jams 58
  • Lexmark C530DN | User's Guide - Page 59
    (Tray 2) 7 Exit bin Use the following table to locate instructions for a particular jam. Note: To resolve any message, all under the photoconductors" on page 62 200.xx Paper Jam Jam in the manual feed slot "Clearing jams in the manual feeder" on page 68 201.xx Paper Jam Jam between an input
  • Lexmark C530DN | User's Guide - Page 60
    Clearing jams just beyond Tray 1 If the paper did not feed from Tray 1 correctly, the jam is in the tray. 241.xx Paper Jam appears. 1 Open Tray 1. 2 Remove the jam. 3 Reinsert the tray. If the paper fed from Tray 1 and jammed just beyond the tray, 200.xx Paper Jam appears. 1 Open Tray 1. 2 Remove
  • Lexmark C530DN | User's Guide - Page 61
    Clearing Tray 2 jams If the paper did not feed from Tray 2 correctly, the jam is in the tray. 242.xx Paper Jam appears. 1 Open Tray 2. 2 Remove the jam. 3 Reinsert the tray. If the paper fed from Tray 2, but is caught between Tray 1 and Tray 2, 242.xx Paper Jam may appear. 1 Open Tray 2. 2 Grasp the
  • Lexmark C530DN | User's Guide - Page 62
    inner door. 2 Pull the jammed paper up and out. 3 Close the lower door, and then close the upper door. Jams under the photoconductors Follow these instructions to remove jams under the photoconductors. Clearing jams 62
  • Lexmark C530DN | User's Guide - Page 63
    cover When paper is jammed under the fuser or the fuser cover, 201.xx Paper Jam appears. CAUTION: The fuser and the inside of the printer near the fuser may be hot. Wait for the fuser to cool before clearing jams from this area. Clearing jams 63
  • Lexmark C530DN | User's Guide - Page 64
    jams both under the fuser and in the slot behind the fuser, 202.xx Paper Jam appears. CAUTION: The fuser and the inside of the printer near the fuser may be hot. Wait for the fuser to cool before clearing jams from this area. Warning: To avoid overexposing the photoconductors, do
  • Lexmark C530DN | User's Guide - Page 65
    Clearing jams between the fuser and the standard exit bin When the jammed paper is visible in the standard exit bin, 202.xx Paper Jam appears. Grasp the paper, and pull it away from the bin. Clearing jams in the standard exit bin When paper jams in the standard exit bin, 203.xx Paper Jam appears.
  • Lexmark C530DN | User's Guide - Page 66
    Jams in the duplex area When paper is jammed between the inner door and the lower door, 230.xx Paper Jam appears. 1 Open the upper door. 2 Pull the jammed paper straight up. Note: For more room to grasp the paper, pull the handle to open the lower door. 1 2 3 Remove the jam and close the door
  • Lexmark C530DN | User's Guide - Page 67
    When paper jams entering Tray 1, 230.xx Paper Jam appears. 1 Remove Tray 1. 2 Pull the jammed paper down and out. 3 Replace the tray. When paper jams as shown in the following illustration, 200.xx Paper Jam or 230.xx Paper Jam appears. 1 Open Tray 1. 2 Pull the jammed paper straight up. Note: If no
  • Lexmark C530DN | User's Guide - Page 68
    When paper is not placed far enough into the manual feeder, the display prompts you to insert paper. If the paper is pushed far enough into the manual feeder for the printer to sense it, but not far enough to feed properly, 200.xx Paper Jam appears. In either case, push the paper
  • Lexmark C530DN | User's Guide - Page 69
    other held jobs" on page 45. Aligning the toner cartridges Sometimes replacing the transfer belt affects the alignment of the toner cartridges. For the best print quality, complete the following steps after replacing the transfer belt: 1 Make sure the printer is turned off. 2 From the control panel
  • Lexmark C530DN | User's Guide - Page 70
    Press until Exit Config Menu appears, and then press . Resetting the Printer appears briefly, followed by a clock, and then Ready appears. Cleaning toner cartridges. 6 Close the doors. Ordering supplies To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark
  • Lexmark C530DN | User's Guide - Page 71
    text and graphics remain faded, replace the specified toner cartridge. The recommended toner cartridges specifically designed for your printer are: Part name Cyan Extra High Yield Return Program Toner Cartridge Part number C5340CX For printer(s) C534 Magenta Extra High Yield Return Program
  • Lexmark C530DN | User's Guide - Page 72
    Toner Cartridge C5200KS Cyan Toner Cartridge C5222CS Magenta Toner Cartridge C5222MS Yellow Toner Cartridge C5222YS Black Toner Cartridge C5222KS Cyan Toner Cartridge C5202CS Magenta Toner Cartridge C5202MS Yellow Toner Cartridge C5202YS Black Toner Cartridge C5202KS For printer
  • Lexmark C530DN | User's Guide - Page 73
    Full or 82 Replace Waste Toner Box appears, you need to order a replacement waste toner box. Part number C52025X Part name Waste toner box Ordering a fuser Unit Photoconductor Unit, Multi-Pack Moving the printer Before moving the printer CAUTION: The printer weighs 25.40 kg (56 lb); therefore
  • Lexmark C530DN | User's Guide - Page 74
    can be safely moved to another location by following these precautions: • Remove all printer options before moving the printer. • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to
  • Lexmark C530DN | User's Guide - Page 75
    , press . This saves the setting as the new default. Ready appears on the display. Disabling control panel menus Since many people could be using the printer, a support person may choose to lock the control panel menus to keep menu settings from being changed. 1 Make sure the
  • Lexmark C530DN | User's Guide - Page 76
    and then press . When Activating Menu Changes appears, the menus are enabled. Resetting the Printer appears briefly, followed by a clock, and then Ready appears. Disabling Quick Start mode Quick and then press . Restoring Factory Defaults appears briefly, then Ready appears. Administrative support 76
  • Lexmark C530DN | User's Guide - Page 77
    settings are restored: • All downloaded resources in the printer memory are deleted. This includes the Lexmark Web site at www.lexmark.com/publications. Encrypting the printer hard disk This functionality is only available when a printer hard press . A progress bar appears. Administrative support 77
  • Lexmark C530DN | User's Guide - Page 78
    can use the printer lockout functionality to create a PIN that must be entered in order to use the printer. When the printer is locked, every print job it receives will buffer to the hard disk. To print the jobs, the user must enter the correct PIN using the control panel. Administrative support 78
  • Lexmark C530DN | User's Guide - Page 79
    the address line, enter the IP address of the printer or print server to be protected using the format: http://ip_address/. 2 Click Configuration. 3 Under Other Settings, click Security. 4 Click Confidential Print Setup. Supporting IPSec Internet Protocol Security (IPSec) provides authentication and
  • Lexmark C530DN | User's Guide - Page 80
    (Wi-Fi Protected Access) feature of wireless printers or print servers to provide WPA-Enterprise security support. Support for 802.1x requires the establishment of credentials for the printer, such as certificates. Certificates provide a way for the printer to be known to the Authentication Server
  • Lexmark C530DN | User's Guide - Page 81
    enter the IP address of the printer or print server to be protected print server is installed in the printer, click Wireless instead. Using Secure the port to open only when the printer is not in Secure mode Note: A line, enter the IP address of the printer or print server to be protected using the
  • Lexmark C530DN | User's Guide - Page 82
    Test and Ready do not appear, turn the printer off and contact Customer Support. Error message about reading USB drive appears USB device may not be supported. For information regarding tested and approved USB flash memory devices, see the Lexmark Web site at www.lexmark.com. Troubleshooting 82
  • Lexmark C530DN | User's Guide - Page 83
    for network printing. For more information about installing a network printer, click View User's Guide and Documentation on the Software and Documentation CD. Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com. You are using the wrong USB or Ethernet
  • Lexmark C530DN | User's Guide - Page 84
    printer software match the paper size and type in the tray. Incorrect characters print Cause Solution Printer mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode same in both trays. • Make sure the paper guides in the trays are set for the correct media
  • Lexmark C530DN | User's Guide - Page 85
    is selected in the program you are using. Mac OS 9 users: Make sure the printer is set up in the Chooser. Troubleshooting for specific options follows. If the suggested corrective action does not fix the problem, contact Customer Support. Drawers • Make sure the connection between the drawer and
  • Lexmark C530DN | User's Guide - Page 86
    Solving paper feed problems Paper frequently jams Cause Solution Media loaded does not meet the printer specifications. Use recommended paper and other specialty media. For detailed specifications, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com. Too much
  • Lexmark C530DN | User's Guide - Page 87
    Exit Config Menu appears, and then press . The information in the following topics may help you solve print quality problems. If these suggestions still do not correct the problem, contact Customer Support. You may have a printer part that requires adjustment or replacement. Troubleshooting 87
  • Lexmark C530DN | User's Guide - Page 88
    the toner cartridge if the defects occur multiple times down a page, a toner cartridge every: about installing supplies, see the User's Guide on the Software and Documentation CD. the printer on. 3 Release both buttons when Performing Self Test appears. The printer performs its Troubleshooting 88
  • Lexmark C530DN | User's Guide - Page 89
    Config Menu appears, and then press . Resetting the Printer appears briefly, followed by a clock, and then Ready appears. Dark lines Example ABCDE ABCDE ABCDE Cause Toner cartridge(s), photoconductor, or transfer belt is defective. Solution • If the problem is on the front (print side) of the
  • Lexmark C530DN | User's Guide - Page 90
    . • Make sure the Paper Type and Paper Weight settings match the type of media you are using. Color Saver is On. Turn Color Saver off. Toner is low. Replace the toner cartridge. Toner cartridge is defective or worn. Troubleshooting 90
  • Lexmark C530DN | User's Guide - Page 91
    . Transfer belt is worn or defective. Photoconductor is worn or defective. Fuser is worn or defective. Toner is in the paper path. Solution Reinstall or replace the cartridge. Replace the transfer belt. Replace the photoconductor. Replace the fuser. Call for customer service. Troubleshooting 91
  • Lexmark C530DN | User's Guide - Page 92
    is worn or defective. Solution Replace the toner cartridge. Replace the photoconductor. Characters have jagged or uneven edges Cause Downloaded font is not supported. Solution If you are using downloaded fonts, verify the fonts are supported by the printer, the host computer, and the software
  • Lexmark C530DN | User's Guide - Page 93
    . • Install a new toner cartridge. Replace the toner cartridge. Cause Photoconductor is installed incorrectly. Photoconductor is defective. Printer requires servicing. Solution Remove and then reinstall the photoconductor. Replace the photoconductor. Call for customer service. Troubleshooting 93
  • Lexmark C530DN | User's Guide - Page 94
    paper in its original wrapper until you use it. Toner specks Cause Toner cartridges are worn or defective. Toner is in the media path. Toner rubs off Solution Replace the defective or worn toner cartridges. Call for customer service. Cause Solution Specialty media is being used. Make sure
  • Lexmark C530DN | User's Guide - Page 95
    typical color problems. Quality menu Menu item Print Mode Color Correction Print Resolution Toner Darkness Enhance are impossible to duplicate on the printed page. Off Manual • Auto is the default setting. Auto applies different network printer IP address in a browser window. Troubleshooting 95
  • Lexmark C530DN | User's Guide - Page 96
    setting. • On overrides Toner Darkness settings. • Color Saver is not supported in PPDS, and only partially supported by the PCL emulation printer software. Adjusts brightness in in network printers. Type the IP address of the printer in a browser window to see these pages. Troubleshooting 96
  • Lexmark C530DN | User's Guide - Page 97
    • RGB Text • RGB Graphics Manual Color Œ • CMYK Image • Black applies a color conversion table that uses only black toner for neutral gray colors. • sRGB Vivid applies a of color conversion tables and allows None the printer to make adjustments for color variations in output Notes Troubleshooting 97
  • Lexmark C530DN | User's Guide - Page 98
    inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers This problem most Guide on the Software and Documentation CD. What is manual
  • Lexmark C530DN | User's Guide - Page 99
    type of color-matching problem. The nine Color Samples values correspond to color conversion tables in the printer. Selecting any of of the object in a software program. For instructions, see the software program Help. Manual Color Correction may be necessary to utilize the pages. Troubleshooting 99
  • Lexmark C530DN | User's Guide - Page 100
    Cyan, Magenta, and Yellow. Contacting Customer Support When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution. You need to know your printer model type and serial number. For more
  • Lexmark C530DN | User's Guide - Page 101
    In the U.S. or Canada, call (1-800-539-6275). For other countries/regions, visit the Lexmark Web site at www.lexmark.com. Troubleshooting 101
  • Lexmark C530DN | User's Guide - Page 102
    product, visit the Lexmark Web site at www.lexmark.com. References in this publication to products, programs, or services do not imply printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer
  • Lexmark C530DN | User's Guide - Page 103
    not installed and used in accordance with the instructions, may cause harmful interference to radio communications. should be directed to: Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Support, Lexmark International, Inc., S.A., Boigny, France.
  • Lexmark C530DN | User's Guide - Page 104
    site at www.lexmark.com for your local sales office phone number. ENERGY STAR Applicable only to models with a duplexer installed. Laser notice The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified
  • Lexmark C530DN | User's Guide - Page 105
    maintenance, or prescribed service condition. Laser advisory label A laser notice label may be affixed to this printer as shown: Power consumption higher than the average. Values are subject to change. See www.lexmark.com for current values. Power Saver This product is designed with an
  • Lexmark C530DN | User's Guide - Page 106
    service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark). For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at www.lexmark.com/support
  • Lexmark C530DN | User's Guide - Page 107
    attachments -Accidents, misuse, abuse or use inconsistent with Lexmark user's guides, manuals, instructions or guidance -Unsuitable physical or operating environment -Maintenance by anyone other than Lexmark or a Lexmark authorized servicer -Operation of a product beyond the limit of its
  • Lexmark C530DN | User's Guide - Page 108
    75 documents, printing from Macintosh 45 from Windows 45 duplex printing, manual 50 E Embedded Web Server locking control panel menus 78 locking entire printer 78 modifying confidential print settings 79 supporting IPSec 79 supporting SNMPv3 80 using 802.1x authentication 80 using Secure mode 81
  • Lexmark C530DN | User's Guide - Page 109
    curls badly 94 tray linking does not work 84 unexpected page breaks occur 85 printer configurations 9 models 9 moving 73, 74 printer option problems hard disk with adapter 86 printer options troubleshooting drawers 85 flash memory card 85 infrared adapter 86 internal print server 86 memory card
  • Lexmark C530DN | User's Guide - Page 110
    board accessing 15 reinstalling access cover 25 T toner cartridges aligning 69 ordering 71 removing 51 transfer belt ordering 72 transparencies guidelines 39 loading 30 tray linking 36 troubleshooting checking an unresponsive printer 82 contacting Customer Support 100 error reading USB drive 82 FAQ
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
C530, C532, and C534
User's Guide
July 2006
www.lexmark.com
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
All other trademarks are the property of their respective owners.
© 2006 Lexmark International, Inc
All rights reserved.
740 West New Circle Road
Lexington, Kentucky 40550