Lexmark Dot Matrix Lexmark 4227 Plus User's Guide - Page 97
Loading Continuous Forms in the Tractor 2, Feeder
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Printer Options Loading Continuous Forms in the Tractor 2 Feeder 1 Turn the printer On. 2 Make sure the paper path is clear. If a single sheet or envelope is loaded in the printer, remove it. 3 Make sure AutoGap is set to On or Single AutoGap. For help, see "Set- ting AutoGap" on page 44. 4 Make sure the paper select lever is pushed down in the continuous forms position. 5 Notice how the manual feed tray fits onto the Tractor 2 Feeder. You will need to remember this when you replace the tray later. 6 Lift up and pull out the manual feed tray to remove it from the Tractor 2 Feeder. Chapter 5: Printer Options 91
91
Chapter 5: Printer Options
Printer Options
Loading Continuous Forms in the Tractor 2
Feeder
1
Turn the printer On.
2
Make sure the paper path is clear. If a single sheet or envelope is
loaded in the printer, remove it.
3
Make sure
AutoGap
is set to On or Single AutoGap. For help, see “Set-
ting AutoGap” on page 44.
4
Make sure the paper select lever is pushed down in the
continuous forms
position.
5
Notice how the manual feed tray fits onto the Tractor 2 Feeder. You
will need to remember this when you replace the tray later.
6
Lift up and pull out the manual feed tray to remove it from the Tractor
2 Feeder.