Lexmark MS711 Quick Reference - Page 3

ABC ABC 3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded. 1 2 3 Without an optional staple finisher With an optional staple finisher ABC One‑sided printing ABC One‑sided printing Notes: • Lock the length guide for all paper sizes. • Use the paper size indicators on the bottom of the tray to help position the guides. 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. Two‑sided printing Two‑sided printing • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray. One‑sided printing Two‑sided printing 5 Load the paper stack with the printable side facedown. Note: Make sure the paper is loaded properly. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not. Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur. 3