Lexmark MS711 Quick Reference - Page 6

b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide is not attached, then proceed to step d. d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks into place. 3 Flex and fan the sheets to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. c Put the A5 length guide in its holder. 1 2 4 Load the paper stack with the printable side facedown. Note: Make sure the paper is loaded properly. • There are different ways for loading letterhead depending on whether an optional staple finisher is installed or not. Without an optional staple finisher With an optional staple finisher ABC LGLOFCFOLILOTR A4 A5 One‑sided printing ABC One‑sided printing ABC ABC Two‑sided printing Two‑sided printing • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray. 6