Lexmark X748 User's Guide - Page 162

Understanding the printer menus 162 Use Wiping Mode Off Auto Manual Scheduled Wiping Time Day Manual Wiping Start now Do not start now Automatic Method Single pass Multiple pass Manual Method Single pass Multiple pass Scheduled Method Single pass Multiple pass To Specify the mode for disk wiping. Note: Auto is the factory default setting. The printer determines when to initiate a disk wipe. Set the schedule for disk wiping. Notes: • Time is used to set the time for scheduled wiping. • Day is used to set the specific day or period for scheduled wiping. Select from the following options: Sunday to Friday, Everyday, Weekdays, and Weekends. • Scheduled wipes are initiated without displaying a user warning or confirmation message. • Both manual and scheduled wiping allow the file system to reuse marked disk space without first having to wipe it. Overwrite the disk space that has been used to hold data from a processed print job. This type of wiping does not erase any information related to an unprocessed print job. Notes: • "Do not start now" is the factory default setting. • If the Disk Wiping access control is activated, then a user must successfully authenticate and have the required authorization in order to initiate the disk wipe. Mark the disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared. Notes: • "Single pass" is the factory default setting. • Only automatic wiping enables users to activate disk wiping without having to turn the printer off for an extended amount of time. • Wipe highly confidential information using only the Multiple pass method. Allow the file system to reuse marked disk space without having to wipe it first. Notes: • "Single pass" is the factory default setting. • Highly confidential information should be wiped using the Multiple pass method only. Allow the file system to reuse marked disk space without having to wipe it first. Note: "Single pass" is the factory default setting.