Lexmark X748 User's Guide - Page 178

Understanding the printer menus 178 Use Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0-255 Default Green Threshold 0-255 Default Blue Threshold 0-255 Contrast 0-5 Best for content Mirror Image Off On Negative Image Off On Shadow Detail ‑4 to 4 Scan edge to edge Off On Sharpness 1-5 Temperature ‑4 to 4 Sample Copy Off On Fax Settings menu To Specify which color to drop during copies, and how much to increase or decrease the dropout. Notes: • None is the factory default setting for Color Dropout. • 128 is the factory default setting for each color threshold. Specify the contrast used for the copy job. Note: "Best for content" is the factory default setting. Create a mirror image of the original document. Note: Off is the factory default setting. Create a negative image of the original document. Note: Off is the factory default setting. Adjust the amount of shadow detail visible on a copy. Note: 0 is the factory default setting. Specify if the original document is scanned edge-to‑edge. Note: Off is the factory default setting. Adjust the amount of sharpness of a copy. Note: 3 is the factory default setting. Enable the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer output than the default, while "warm" values generate a redder output than the default. Create a sample copy of the original document. Note: Off is the factory default setting. Fax Mode (Analog Fax Setup) menu Analog Fax Setup mode sends the fax job through a telephone line.