Lexmark X748 User's Guide - Page 179

Understanding the printer menus 179 General Fax Settings Use To Fax Name or Station Name Specify the name of the fax in the printer. Fax Number or Station Number Specify the number assigned to the fax. Station ID Specify how the fax is identified. Fax Name or Station Name Fax Number or Station Number Enable Manual Fax Off On Set the printer to fax manually only, which requires a line splitter and a telephone handset. Notes: Memory Use Equal Mostly sent All send All receive Mostly receive Cancel Faxes Allow Don't Allow Caller ID On Off Alternate Fax number masking Off From left From right Digits to mask 0-58 • Use a regular telephone to answer an incoming fax job and to dial a fax number. • Touch # 0 on the numeric keypad to go directly to the Manual Fax function. Define the allocation of non-volatile memory between sending and receiving fax jobs. Notes: • "Equal" is the factory default setting. Equal splits the memory for sending and receiving fax jobs into equal amounts. • "Mostly sent" specifies that most of the memory is set to send fax jobs. • "All send" specifies that all the memory is set to send fax jobs. • "All receive" specifies that all the memory is set to receive fax jobs. • "Mostly receive" specifies that most of the memory is set to receive fax jobs. Specify whether or not the printer cancels fax jobs. Specify the type of caller ID being used. Specify the direction from where digits are masked in an outgoing fax number. Note: The number of characters masked is determined by the "Digits to mask" setting. Specify the number of digits to mask in an outgoing fax number.