Lexmark X748 User's Guide - Page 184

Understanding the printer menus 184 Fax Receive Settings Use Enable Fax Receive On Off Fax Job Waiting None Toner Toner and Supplies Rings to Answer 1-25 Auto Reduction On Off Paper Source Auto Tray [x] Multi‑Purpose Feeder Sides (Duplex) Off On Separator Sheets Off Before Job After Job Separator Sheet Source Tray [x] Manual Feeder Output Bin Standard Bin Bin [x] Fax Footer Off On Max Speed 2400 4800 9600 14400 33600 To Allow the printer to receive fax jobs. Note: On is the factory default setting. Remove fax jobs that request specific unavailable resources from the print queue. Note: None is the factory default setting. Specify the number of rings before answering an incoming fax job. Note: 3 is the factory default setting. Scale an incoming fax job so that it fits the size of the paper loaded in the designated fax source. Note: On is the factory default setting. Specify the paper source selected to supply paper for the printer to print an incoming fax. Enable two‑sided (duplex) printing for incoming fax jobs. Enable the printer to include separator sheets for incoming fax jobs. Specify where the printer will pick the separator sheet. Specify an exit bin for received faxes. Note: Bin 1 is available only when a finisher is installed. Print the transmission information at the bottom of each page from a received fax. Note: Off is the factory default setting. Specify the maximum speed in baud at which faxes are received.