Linksys SPA921 Cisco Small Business IP Phone SPA9X1 Administration Guide - Page 112
Static IP Settings, PPPoE Settings, Optional Network Configuration
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Chapter 5 Linksys IP Phone Field Reference Field Gateway (SPA901 only) Static IP Settings Description Default router IP address. Blank if DHCP assigned. Note None of the following parameters apply to the SPA901. Field Static IP Netmask Gateway Description IP address. Blank of DHCP assigned address is used. Network mask. Blank if DHCP assigned. Default router IP address. Blank if DHCP assigned. PPPoE Settings Note None of the following parameters apply to the SPA901. System Tab Field PPPoE Login Name PPPoE Login Password PPPoE Service Name Description Specifies the account name assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. Specifies the password assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. Specifies the service name assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. Optional Network Configuration Field Host Name Domain Primary DNS Description The host name of the Linksys IP phone. The network domain of the Linksys IP phone. DNS server used by Linksys IP phone in addition to DHCP supplied DNS servers if DHCP is enabled; when DHCP is disabled, this is the primary DNS server. Defaults to 0.0.0.0. Firmware Version 5.1 Linksys IP Phone Administrator Guide 5-7