Linksys SPA921 Cisco Small Business IP Phone SPA9X1 Administration Guide - Page 98
Enable Web Server, 9.8 Non DHCP IP Address, 9.9 Non DHCP Subnet Mask, 9.10 Non DHCP Default Route
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Chapter 4 SPA900 Series LCD Command Reference 9 Network • Receive the address from a DHCP server (you cannot edit it) • Manually set the address using the Non DHCP Default Route option (Option 9.10) 9.7 Enable Web Server Shortcut: Setup, 9, 7, y/n, ok To view the status of the Web Server, press 7 from the Network menu, or scroll down to highlight Enable Web Server and press the select soft key. To enable or disable the Web Server, press the edit soft key. Press the y/n soft key to toggle between Yes to No and press ok. 9.8 Non DHCP IP Address Shortcut: Setup, 9, 8, ip_address, ok To manually set the IP address, press 8 from the Network menu, or scroll down to highlight Non DHCP IP Address and press the select soft key. Then press the edit soft key. The display shows the option to enter an IP address. enter the IP address here. This IP address is always used by the phone (it is a static IP address). After entering IP address, press ok. 9.9 Non DHCP Subnet Mask Shortcut: Setup, 9, 9, subnet_mask, ok To manually set the subnet mask, press 9 from the Network menu, or scroll down to highlight Non DHCP Subnet Mask and press the select soft key. Then press the edit soft key. After entering the subnet mask, press ok. 9.10 Non DHCP Default Route Shortcut: Setup, 9, 10, ip_address, ok To edit the default gateway (router), press 10 or scroll down to highlight Non DHCP Default Route and press the select soft key. Then press the edit soft key. After entering the default route, press ok.. 9.11 Non DHCP DNS 1 Shortcut: Setup, 9, 11, ip_address, ok To edit the primary DNS server used by the phone, press 11 from the Network menu, or scroll down and highlight Non DHCP DNS 1 and press the select soft key. Then press the edit soft key. After entering the IP address of the server, press ok. 9.12 Non DHCP DNS 2 Shortcut: Setup, 9, 12, ip_address, ok To edit the secondary DNS server used by the phone, press 12 from the Network menu, or scroll down and highlight Non DHCP DNS 1 and press the select soft key. Then press the edit soft key. After entering the IP address of the server, press ok. Firmware Version 5.1 Linksys IP Phone Administrator Guide 4-11