Linksys SPA921 Cisco Small Business IP Phone SPA9X1 Administration Guide - Page 146
Proxy and Registration, Ring, 1 through 10, User 1, or User 2.
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Chapter 5 Linksys IP Phone Field Reference Ext Tab MOH Server Message Waiting Auth Page Default Ring Auth Page Realm Conference Bridge URL Auth Page Password Mailbox ID Voice Mail Server State Agent CFWD Notify Serv CFWD Notifier User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the MOH Server is not specified. Defaults to imusic when used with a SPA9000 IP PBX. Indicates whether the Message Waiting Indicator on the phone is lit. This parameter is toggled by a message from the SIP proxy to indicate if a message is waiting. You can manually modify it to clear or set the flag in the Ext 1-6 tab. Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is stored in long-term memory and survives after reboot or power cycle. Defaults to No. Specifies whether to authenticate the invite before auto answering a page. Defaults to No. Type of ring heard. This corresponds to the Ring Tone on the Phone tab. Choose from No Ring, 1 through 10, User 1, or User 2. Defaults to 1. Identifies the Realm part of the Auth that is accepted when the Auth Page parameter is set to Yes. This parameter accepts alphanumeric characters. Defaults to blank. This is the URL used to join into a conference call, generally in the form of the word "conference" or "user@IPaddress:port". Defaults to blank. Identifies the password used when the Auth Page parameter is set to Yes. This parameter accepts alphanumeric characters. Defaults to blank. Identifies the voicemail box number/ID for the phone. Defaults to blank. Identifies the SpecVM server for the phone, generally the IP address and port number of the VM server. Reserved feature. Specifies whether to enable a SIP-B feature regarding the sending of a Notify to the phone when a call is forwarded elsewhere. Defaults to No. Typically, this field is configured with the SIP proxy information. Proxy and Registration Note Many of the following parameters do not apply to the SPA901. Firmware Version 5.1 Linksys IP Phone Administrator Guide 5-41