Linksys SPA921 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 33
Installation and Configuration Process Overview, A. Preparation, B. Connecting the Equipment
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2 Installation and Configuration Process Overview This chapter provides an overview of the installation and configuration process. A. Preparation In Chapter 3, "Preparation," you learn about the equipment and service requirements, bandwidth requirements, call capacity, and related topics , to ensure that the system is well designed to meet the needs of the customer. This chapter also describes basic procedures such as downloading firmware, which should be completed before you begin installing the equipment. B. Connecting the Equipment In this phase, you physically connect the SPA9000 Voice System equipment to the LAN. Chapter 4, "Connecting the Equipment" explains how to connect the SPA9000, which provides the PBX service for the phones, and the SPA400, which provides voice mail service and PSTN access. You also learn how to install the IP phones and any accessories such as PoE adapters and wall-mount brackets. You also upgrade the firmware with the new files that you downloaded during the Preparation phase. C. Configuring Voice Services After you connect the equipment, you need to configure voice features such as ITSP service, PSTN access, and voice mail service.Chapter 5, "Configuring Phone Service and Voice Mail" guides you through these steps. You also set up call routing for outbound and inbound calls. SPA9000 Voice System Installation and Configuration Guide for Web UI 31