Linksys SPA921 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 78
Configuring the SPA400, Configuring the SPA400 Network Connection
UPC - 745883570799
View all Linksys SPA921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Configuring Phone Service and Voice Mail Configuring the SPA400 5 Configuring the SPA400 If you have a SPA400 in your network, you need to configure the SPA400 to communicate with the SPA9000. In addition, if you are using the SPA400 as a voice mail server, you need to configure the voice mail settings. • "Configuring the SPA400 Network Connection," on page 76 • "Configuring the SPA400 to Communicate with the SPA9000," on page 78 • "Configuring the Voice Mail Server and Voice Mail Users," on page 82 Configuring the SPA400 Network Connection The SPA400 becomes a DHCP client of any server on the network. The recommended setting is to use a static IP address. This configuration provides ease of installation and prevents connectivity issues that would occur if the IP address of the SPA400 changed. STEP 1 Start Internet Explorer, and enter the IP address of the SPA400. NOTE By default, the SPA400 is configured to obtain an IP Address via DHCP. You can check the obtained IP address on the router DHCP server's client list. STEP 2 When the password prompt appears, enter the default user name, Admin, with no password. Then click OK. SPA9000 Voice System Installation and Configuration Guide for Web UI 76