Linksys SPA922 Cisco Small Business Pro SPA and Wireless IP Phone Administrati
Linksys SPA922 - IP Phone With Switch Manual
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Linksys SPA922 manual content summary:
- Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 1
ADMINISTRATION GUIDE Cisco SPA and Wireless IP Phone Cisco SPA525G, SPA922, SPA942, SPA962, and WIP310 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 2
, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect, Cisco Stackpower, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 3
Network Configurations 17 Cisco SPA9000 Voice System 17 Cisco Unified Communications 500 Series for Small Business 19 Other SIP IP PBX Call Control Systems 20 Prerequisites 20 Upgrading Firmware 20 Determining the Current Firmware Version 21 Determining Your IP Address 22 Downloading - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 4
Cisco SPA and Wireless IP Phones 47 Configuring Phone Information and Display Settings 47 Configuring the Phone Name 48 Configuring Voice Mail 48 Customizing the Startup Screen 49 Changing the Display Background (SPA942/962/525G) 50 Configuring the Screen Saver 52 Configuring the Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 5
Disturb and Call Forward 82 Configuring XML Services (SPA525G) 82 Configuring Music On Hold 83 Configuring Extension Mobility with a BroadSoft Server 84 Chapter 5: Configuring SIP, SPCP, and NAT 87 Session Initiation Protocol and Cisco IP Phones 87 SIP Over TCP 88 SIP Proxy Redundancy - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 6
Configuring SDP Payload Types Configuring SIP Settings for Extensions Configuring SPCP on the SPA525G Network Address Translation (NAT) and Cisco IP Phones NAT Mapping with Session Border Controller NAT Mapping with SIP-ALG Router Configuring NAT Mapping with a Static IP Address Configuring NAT - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 7
Contents IP Phone Configuration Profiles 136 General Purpose Parameters 137 Sample Configuration File 138 Upgrading, Resyncing, and Rebooting Phones 138 Firmware Upgrade Parameters 140 Resyncing a Phone 141 Rebooting a Phone 142 Redundant Provisioning Servers 142 Retail Provisioning - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 8
BroadSoft Busy Lamp Field Auto-Configuration (SPA525G) SPA932 Parameter Notes Monitoring the SPA932 SPA932 Unit Monitoring Notes 153 153 158 158 159 161 161 161 164 164 165 167 167 169 171 173 174 175 176 176 177 178 179 182 183 184 185 Cisco SPA and Wireless IP Phone Administration Guide 6 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 9
only) SIP Tab SIP Parameters SIP Timer Values (sec) Response Status Code Handling RTP Parameters SDP Payload Types NAT Support Parameters Linksys Key System Parameters Provisioning Tab Regional Tab Call Progress Tones Distinctive Ring Patterns Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 10
NAT Settings Network Settings SIP Settings Call Feature Settings Proxy and Registration Subscriber Information Audio Configuration Dial Plan 220 221 227 227 230 230 231 236 236 239 240 241 243 245 246 246 247 247 248 249 252 252 253 253 254 255 258 260 262 263 265 Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 11
Tabs Wi-Fi Bluetooth (SPA525G) Personal Address Book Call History Speed Dials Firmware Upgrade Appendix C: Where to Go From Here Related Documentation 266 267 267 267 268 268 269 269 271 271 272 273 273 274 274 275 275 275 275 275 276 277 278 Cisco SPA and Wireless IP Phone Administration Guide 9 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 12
277 for more information on these products. This manual is for Cisco partners, value added resellers (VARs) and Internet service providers. Use this manual to configure the administrative functions of the Cisco SPA and Wireless IP Phones. Cisco SPA and Wireless IP Phone Administration Guide 10 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 13
upgrading firmware and accessing the web administration interface. Configuring Lines and Contains information for configuring Extensions phone lines and extensions. Customizing Cisco SPA Gives information about customizing and Wireless IP Phones phones, including configuring call features - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 14
specific folder or disk drive) • Perform advanced searches Finding Information in PDF Files The IP phone documents are published as PDF files. The PDF Find/Search tool within Adobe® Reader® Follow this procedure to find text in a PDF file. Cisco SPA and Wireless IP Phone Administration Guide 12 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 15
1 Enter your search terms in the Find text box on the toolbar. NOTE By default, the Find tool is available at the right end of the Acrobat toolbar. If for Location. Then choose the location on your computer or local network, and click OK. Cisco SPA and Wireless IP Phone Administration Guide 13 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 16
link to open the file where the search terms appear. For more information about the Find and Search functions, see the Adobe Acrobat online help. Cisco SPA and Wireless IP Phone Administration Guide 14 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 17
Information, page 31 The Cisco SPA and Wireless-G IP Phone family is a line of full-featured VoIP (Voice over Internet Protocol) phones that provide voice communication over an IP network. They provide all the features of traditional business phones, such as call forwarding, redialing, speed dialing - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 18
The Cisco SPA and Wireless-G IP Phone family includes the following phone models: • SPA922-Single-line VoIP phone. • SPA941/942-Four-line VoIP phone with high-resolution monochromatic display. • SPA962-Six-line VoIP phone with high-resolution color display. • SPA525G-Five-line VoIP phone with - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 19
Attendant Console." Network Configurations The Cisco SPA and Wireless-G IP Phones support Session Initiation Protocol (SIP) or (SPA525G only) Smart Phone Control Protocol (SPCP). You can use the Cisco SPA9X2 and Wireless-G IP Phones as part of a Cisco SPA9000 Voice System phone network, or with - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 20
support legacy phone lines. The SPA400 also provides local voice mail service. When you use Cisco SPA IP and Wireless-G IP phones with the Cisco SPA9000 Voice System, the following additional phone features are available: • Auto attendant for multiple extensions • Music on hold • Configurable call - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 21
Network Configurations 2 SPA400 for Voice Mail SPA400 for PSTN Access Analog Phone Lines SPA9xx IP Phones WIP310 Wireless-G IP Phone SLM224P Switch SPA9000 IP PBX Analog Phones or Fax Machines WRV200 Router Integrated Access Device Internet Figure 1 Cisco SPA IP Phones with Cisco SPA9000 IP - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 22
the Cisco SPA9000 Voice System Setup Wizard User Guide. • Autoprovisioning-A configuration file that includes upgrade information is sent downloaded by a user's phone when it is powered on. See the "Upgrading, Resyncing, and Rebooting Phones" section on page 138. 20 Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 23
)-Download the firmware upgrade utility from the product page on Cisco.com to your PC desktop and run the upgrade from your PC by double-clicking the executable file. Your computer must be on the same network as the SPA IP phone. SPA525G • Web Interface (SPA525G)-You can download the latest firmware - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 24
Network Status and press Select. The IP address of your phone is displayed. WIP310 STEP 1 In the Home screen, press the Select key and navigate to Settings. STEP 2 Press the Select key and navigate to Phone Info. STEP 3 Scroll to Software Version. The phone lists the software version. 22 Cisco SPA - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 25
sub-network as the phone you are upgrading. STEP 1 Run the executable file for the firmware upgrade (for example, double click upgspa942-5-2-8.exe). STEP 2 Click Continue after reading the message regarding upgrading and your service provider. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 26
. STEP 2 Double-click the executable file for the firmware upgrade (for example, doubleclick wip310-5-0-11.exe). STEP 3 Follow the on-screen instructions. STEP 4 When the upgrade is complete, disconnect the phone from your PC and power it on. 24 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 27
for Small Business for Call Control, use Cisco Unified Communication Manager Express or Cisco Configuration Assistant for phone administration. For more information, refer to the Cisco Unified Communications 500 Office Administrator Guide. To access the IP phone administration web user interface (UI - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 28
Enable Web Server is set to On. STEP 5 Press the Select button to save this setting. SPA525G: STEP 1 Press the Setup button. STEP 2 Select Network Configuration. STEP 3 Scroll to Web Server and make sure it is set to On. STEP 4 Press Save. 26 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 29
or User accounts. Only the Administrator account can assign and change passwords. Accessing Administrative Options To access administrative options, either: • Log in to the web interface, then click Admin Login. • Enter the following URL when accessing the interface: http://phone.ip.address/admin - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 30
to DHCP • Configure the syslog and debug servers • Enable VLAN and CDP On the web UI, click the ... Info tab See "Viewing Phone Information" section on page 31. System tab See Chapter 6, "Configuring Security, Quality, and Network Features." 28 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 31
firmware upgrades • Set general purpose parameters Provisioning tab The Provisioning tab is viewable by Admin logins only. See Chapter 7, "Provisioning Basics." For additional information about provisioning, see the Cisco SPA Provisioning Guide (for Cisco service providers). Configure parameters - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 32
Customize user-level parameters, including: • Call forward • Speed dial • Supplementary services • Web information (RSS newsfeeds) • Traffic information settings • Audio volume • Phone GUI settings User tab See Chapter 4, "Customizing Cisco SPA and Wireless IP Phones." View and change parameters - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 33
log on to the web UI (see "Using the Web Administration User Interface" section on page 25), you can check the current status of a the SPA or Wireless IP Phone by clicking the Info tab (appears by default). The Info tab shows information about all phone extensions, including phone statistics and the - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 34
2 Getting Started Viewing Phone Information 32 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 35
and Extensions This chapter contains the following sections: • Configuring Lines, page 33 • Configuring Extensions, page 44 Configuring Lines The Cisco IP Phones (also called stations in this document) have the following number of lines: • SPA922: One line • WIP310: One line • SPA525G: Five lines - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 36
the preferred codec can vary. Configuring a Line NOTE This section does not apply to the WIP310. To configure a phone line: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. 34 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 37
Busy Lamp Field, Call Pickup, and Speed Dial Functions to Unused Lines on a SPA525G, SPA962 or SPA942, page 37. This feature is currently not available on the SPA525G. NOTE The number of line keys displayed depends on the type of phone. STEP 5 Click Submit All Changes. Cisco SPA and Wireless IP - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 38
Cisco SPA525G supports the "private hold" feature for MetaSwitch and Broadsoft. Users who have a shared line can press the "PrivHold" softkey, and the call can only be resumed by the user who placed the call on hold. No barge-in can be performed on these calls. 36 Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 39
administration interface. STEP 2 Click Admin Login. STEP 3 Click advanced. STEP 4 Click the Phone tab. STEP 5 Find the first line to configure (line 4 in this example): a. From the Extension drop down list, choose Disabled. b. From the Share Call Appearance drop-down list, choose private. Cisco SPA - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 40
line (line 5) on his SPA962. He would like to be able to speed dial his supervisor Mark (extension 400) from that line. To configure this feature for Bob's SPA962: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login. 38 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 41
) on the SPA525G. Users can then press this line button to park a call or retrieve a parked call. To configure: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login. STEP 3 Click advanced. STEP 4 Click the Phone tab. Cisco SPA and Wireless IP Phone Administration Guide 39 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 42
to access services, such as the following: • XML services • MP3 player • Weather (RSS) • News (RSS) To configure line keys to access services: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login. STEP 3 Click advanced. 40 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 43
: fnc=mp3 STEP 6 Click Submit All Changes. After the phone reboots, configured lines glow orange and display the following icons next to the extension label: • xml: XML icon • mp3: mp3 player icon • news: RSS icon • weather: thermometer icon Cisco SPA and Wireless IP Phone Administration Guide 41 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 44
default value of c=r;p=d. Appears when this station seizes the call appearance to prepare for a new outbound call. Defaults to blank (c=r). Appears when the shared call appearance is seized by another station. Defaults to blank (c=r; p=d). 42 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 45
the proxy server. Leaving this entry blank indicates the default value of c=a. LED pattern when the Call Appearance is disabled (not available for any incoming or outgoing call). Leaving this entry blank indicates the default value of c=o. Cisco SPA and Wireless IP Phone Administration Guide 43 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 46
"Configuring SIP, SPCP, and NAT." • Network Settings-Chapter 5, "Configuring SIP, SPCP, and NAT." • SIP Settings-Chapter 5, "Configuring SIP, SPCP, and NAT." • Call Feature Settings-Chapter 4, "Customizing Cisco SPA and Wireless IP Phones." • Proxy and Registration-Chapter 5, "Configuring SIP, SPCP - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 47
Configuring Lines and Extensions Configuring Extensions 3 • Audio (Codec) Configuration-Chapter 6, "Configuring Security, Quality, and Network Features." • Dial Plan-Chapter 4, "Customizing Cisco SPA and Wireless IP Phones." Cisco SPA and Wireless IP Phone Administration Guide 45 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 48
3 Configuring Lines and Extensions Configuring Extensions 46 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 49
with a BroadSoft Server, page 84 Configuring Phone Information and Display Settings The web administration interface allows you to customize the phone and configure settings such as the phone name, background photo, logo, and screen saver. Cisco SPA and Wireless IP Phone Administration Guide 47 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 50
Cisco SPA and Wireless IP Phones Configuring Phone Information and Display Settings Configuring the Phone Name STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 Under General, enter the Station Name, or name for the phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 51
Customizing Cisco SPA and Wireless IP Phones Configuring Phone Information and Display Settings STEP 5 Enter the IP address of the voice mail server. STEP 6 Click Submit All Changes. 4 Customizing the Startup Screen You can create a text logo to display when the IP phone boots up. (Not applicable - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 52
a TFTP or HTTP server that is accessible from the phone. STEP 2 Log in to the web administration interface. STEP 3 Click Admin Login and advanced. STEP 4 Click the Phone tab. STEP 5 In the Select Background Picture field, select BMP Picture. 50 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 53
that is accessible from the phone. STEP 2 Log in to the web administration interface. STEP 3 Click Admin Login and advanced. STEP 4 Click the User tab. STEP 5 In the Screen section, Background Picture Type field, select Download BMP Picture. Cisco SPA and Wireless IP Phone Administration Guide 51 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 54
phone to return to its normal mode. If a user password is set, the user must enter it to exit screen saver mode. To configure the screen saver: SPA9X2 STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. 52 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 55
Customizing Cisco SPA and Wireless IP Phones Configuring Phone Information and Display Settings 4 STEP 3 Click the Phone tab. STEP 4 In the General section, in the Screen Saver Enable field, choose yes. STEP 5 In the Screen Saver Wait field, enter the number of seconds of idle time to elapse - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 56
SPA9X2 or SPA525G phone. (Not applicable to the WIP310.) To configure the contrast for the LCD screen on the phone: SPA9X2 STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the User tab. 54 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 57
Customizing Cisco SPA and Wireless IP Phones Configuring Phone Information and Display Settings 4 STEP 4 Under Audio Volume, in the LCD Contrast field, enter a number value from 1 to 30. The higher the number, the greater the contrast on the screen. STEP 5 Click Submit All Changes. SPA525G STEP 1 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 58
4 Configure the following fields: • Linksys Key System-Enables or disables the Linksys Key System for use with the LVS SPA9000. Defaults to yes. See the Cisco SPA9000 System Administration Guide for more details. • Multicast Address-Used by the SPA9000 to communicate with Cisco IP phones. Defaults - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 59
, Automatic Call Distribution (ACD) handles incoming calls and manages them based on a database of instructions. You can enable this with the SIP B parameter ("Configuring SIP" section on page 89). Defaults to no (disabled). STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 60
Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 Under Supplementary Services, under the type of call feature to enable, choose yes. • Call Park Serv-Enables call parking. • Call Pickup Serv-Enables call pickup. STEP 5 Click Submit All Changes. 58 Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 61
Call Waiting To enable call waiting: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 Under Supplementary Services, in the CW Setting field, choose yes. STEP 5 Click Submit All Changes. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 62
all incoming calls to voice mail or, if voice mail is not configured, plays a message to the caller saying the user is unavailable. NOTE On the SPA525G, users can press the Ignore softkey to divert a ringing call to the forwarded destination. 60 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 63
Customizing Cisco SPA and Wireless IP Phones Enabling Call Features 4 To allow users to use Do Not Disturb: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 Under Supplementary Services, under DND Serv, choose yes. NOTE - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 64
SPA and Wireless IP Phones Enabling Call Features STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the User tab. STEP 4 Under Supplementary Services, in the Log Missed Calls for EXT field, choose yes. STEP 5 Click Submit All Changes - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 65
Customizing Cisco SPA and Wireless IP Phones Enabling Call Features 4 STEP 5 Click Submit All Changes. Configuring a Phone to Automatically Accept Pages To configure a phone to automatically accept pages: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 66
phones configured as part of the Engineering group. In this example, the configured phone will receive pages directed to the "All" and "Sales" groups. STEP 5 Click Submit All Changes. Enabling Secure Call See Setting Security Features, page 115. 64 Cisco SPA and Wireless IP Phone Administration - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 67
: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Ext tab. STEP 4 Under Call Feature Settings, in the Message Waiting field, choose yes. STEP 5 Click Submit All Changes. Cisco SPA and Wireless IP Phone Administration Guide 65 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 68
web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab and proceed to the Ring Tone section. STEP 4 After configuration, click Submit All Changes. Managing Ring Tones Ten ring tones appear by default. 66 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 69
SPA525G supports on-demand ring tones, which means that ring tones are downloaded and played from a TFTP server when a call comes in. To configure: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 70
a default ring tone is played. STEP 5 Click Submit All Changes. User-Created MP3 Ring Tones (SPA525G) SPA525G users can create up to two ring tones from an MP3 audio file stored on a USB memory device. For instructions, see the Cisco Small Business Pro SPA525G User Guide (SIP), located on Cisco.com - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 71
Cisco SPA and Wireless IP Phones Configuring Phone Features 4 STEP 6 Enter the target. You can have up to two customized ring tones uploaded to the phone. STEP 7 (Optional) Click Preview to preview the ring tone. Click Options to change STEP 2 Enter the IP address of the user's phone or press Skip - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 72
are supported for U.S. customers only. To configure newsfeeds: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the User tab. STEP 4 Under Web Information Service Settings, you can edit the following fields: 70 Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 73
You can change the defaults to your local state, city, street, and zip code for local traffic information. (This feature is not available on the SPA525G or WIP310.) NOTE: Yahoo! Traffic Alerts provides this information to U.S. customers only. Cisco SPA and Wireless IP Phone Administration Guide 71 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 74
Customizing Cisco SPA and Wireless IP Phones Configuring Phone Features To configure traffic information settings: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the User tab. STEP 4 Under Traffic Service Information Settings, you can change - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 75
). STEP 5 Click Submit All Changes. Enabling Wireless (SPA525G only) The SPA525G supports Wireless-G. To enable wireless: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the System tab. Cisco SPA and Wireless IP Phone Administration Guide 73 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 76
headset. To enable Bluetooth: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the System tab. STEP 4 Under Bluetooth Settings, in the Enable BT field, choose yes. STEP 5 Click Submit All Changes. Enabling SMS Messaging These Cisco IP phones - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 77
without proxy involvement, in the Text Message from 3rd Party field, choose yes. STEP 6 Click Submit All Changes. WIP310 STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. Cisco SPA and Wireless IP Phone Administration Guide 75 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 78
. The password prompt will appear users click User Login. The maximum password length is 32 characters STEP 9 Click Submit All Changes. You can also enable the web administration interface from the Phone tab (does not apply to the WIP310): 76 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 79
Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 Under Web Serv, choose yes. STEP 5 Click Submit All Changes. Configuring Lightweight Directory Access Protocol (LDAP) The SPA IP phones support Lightweight Directory Access Protocol - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 80
4 Customizing Cisco SPA and Wireless IP Phones Configuring Lightweight Directory Access Protocol (LDAP) STEP 4 In the Optional Network Configuration section, under Primary DNS, enter the IP address of the DNS server. (Only required if using Active Directory with authentication set to MD5.) STEP 5 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 81
Customizing Cisco SPA and Wireless IP Phones Configuring Lightweight Directory Access Protocol (LDAP) 4 Parameter LDAP Client DN LDAP Username LDAP Password LDAP Search Base LDAP Last Name Filter LDAP First Name Filter LDAP Search Item 3 LDAP Item 3 Filter LDAP Search Item 4 LDAP Item 4 Filter - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 82
graphic is an example of an LDAP configuration: For more information on LDAP, including troubleshooting information, see the Configuring LDAP Directory Search on SPA SIP IP Phones Application Note, available from http://www.cisco.com/web/partners/sell/smb/products/ voice_and_conferencing.html - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 83
last name, first name, or telephone number. • Directory UserID: BroadSoft User ID of the phone user; for example, [email protected]. • Directory Password: Alphanumeric password associated with the User ID. STEP 5 Click Submit All Changes. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 84
Cisco SPA and Wireless IP Phones Configuring XML Services (SPA525G) Configuring Synchronization of Do Not Disturb and Call Forward Enabling synchronization of Do Not Disturb and Call Forward allows the phone to synchronize with the call server so that if Do Not Disturb or Call Forwarding - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 85
Customizing Cisco SPA and Wireless IP Phones Configuring Music On Hold 4 STEP 5 Click Submit All Changes. To configure the phone to connect to an XML application: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 Enter the - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 86
4 Customizing Cisco SPA and Wireless IP Phones Configuring Extension Mobility with a BroadSoft Server SPA9000 Voice System, defaults to imusic. For more information, see the Cisco SPA9000 Voice System Administration Guide. STEP 5 Click Submit All Changes. Configuring Extension Mobility with a - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 87
Customizing Cisco SPA and Wireless IP Phones Configuring Extension Mobility with a BroadSoft Server 4 You must also configure the Extension Mobility parameters in the profile rule field in the Provisioning tab. See the Cisco Small Business IP Telephony Devices Provisioning Guide for more - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 88
4 Customizing Cisco SPA and Wireless IP Phones Configuring Extension Mobility with a BroadSoft Server 86 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 89
• Configuring SIP, page 89 • Configuring SPCP on the SPA525G, page 109 • Network Address Translation (NAT) and Cisco IP Phones, page 109 Session Initiation Protocol and Cisco IP Phones Cisco IP phones use Session Initiation Protocol (SIP), allowing interoperation with all ITSPs supporting SIP. SIP - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 90
5 88 Configuring SIP, SPCP, and NAT Session Initiation Protocol and Cisco IP Phones SIP UA 2 4 SIP Proxy RTP 3 1 SIP Proxy SIP Proxy SIP UA SIP message routing is dynamic. If a SIP proxy receives a request from a UAS for a connection but cannot locate the UAC, the proxy forwards the message - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 91
Cisco IP phone. A simple way to support proxy redundancy is to configure a SIP proxy server in the Cisco IP phone configuration profile. The DNS SRV records instruct the phones to contact a SIP proxy server in a domain named in SIP messages. The phone consults the DNS server. If configured, the DNS - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 92
Setting this parameter to yes encloses the configured Display Name string in a pair of double quotes for outbound SIP messages. Any occurrences of or \ in the string is escaped with \ and \\ inside the pair of double quotes. Defaults to yes. 90 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 93
SIP, SPCP, and NAT Configuring SIP 5 Parameter Description SIP-B Enable If set to yes, enables Sylantro call features. See www.sylantro.com for more information. Defaults to no. Talk Package If set to yes enables support for the BroadSoft Talk Package, which lets users answer or resume a call - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 94
of a Cisco IP phone and, for example, initiate or answer a call by clicking a mouse on a PC, NOTE: CTI must be enabled on the SPA962 for an attached SPA932 to properly monitor the SPA962's line status. If setting up a SPA932, see Chapter 9, "Configuring the SPA932 Attendant Console." Defaults to no - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 95
Configuring SIP, SPCP, and NAT Configuring SIP 5 Configuring SIP Timer Values To configure SIP timer values: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the SIP tab. STEP 4 Under SIP Timer Values, make the necessary configuration changes - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 96
code (RSC) value (see next table), the SPA9000 waits for this length of time before retrying. If this interval is 0, the Cisco IP phone stops trying. This value should be much larger than the Reg Retry Intvl value. Defaults to 1200 seconds. 94 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 97
upper limit of the REGISTER (subscribe) min-expires value returned from the proxy server in the Min-Expires header. Defaults to 7200 seconds. Sub Retry Intvl The retry interval when the last Subscribe request fails. Defaults to 10 seconds. Cisco SPA and Wireless IP Phone Administration Guide 95 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 98
5 Configuring SIP, SPCP, and NAT Configuring SIP NOTE: Cisco IP phones can use a RETRYAFTER value when received from a SIP proxy server that is too busy to process a request (503 Service Unavailable message). If the response message includes a RETRY-AFTER header, the phone waits for the specified - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 99
CNAME, NAME, and TOOL identifiers.: - CNAME is set to User ID@Proxy - NAME is set to Display Name (or Anonymous if user blocks caller ID) - TOOL is set to the Vendor/Hardware-platform-software-version (such as Cisco/SPA9000-5.2.2(SCb)). Cisco SPA and Wireless IP Phone Administration Guide 97 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 100
All Changes. Configuring SDP Payload Types Configured dynamic payloads are used for outbound calls only when the Cisco IP phone presents an SDP offer. For inbound calls with an SDP offer, the phone follows the caller's assigned dynamic payload type. Cisco IP phones use the configured codec names in - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 101
SIP, SPCP, and NAT Configuring SIP 5 To configure SDP payload types: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the SIP tab. STEP 4 Under SDP Payload Types, configure the fields shown in the following table and click Submit All Changes - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 102
in SDP. Defaults to G726-24. NOTE Not applicable to SPA525G. G726r32 Codec Name G.726-32 codec name used in SDP. Defaults to G726-32. G726r40 Codec Name G.726-40 codec name used in SDP. Defaults to G726-40. NOTE Not applicable to SPA525G. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 103
UDP IP packets carrying a SIP message. Defaults to 0x68. SIP CoS Value [0-7] Class of service (CoS) value for SIP messages. Defaults to 3. RTP ToS/DiffServ Value ToS/DiffServ field value in UDP IP packets carrying RTP data. Defaults to 0xb8. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 104
port. Defaults to 5060. To enable the support of 100REL SIP extension for reliable transmission of provisional responses (18x) and use of PRACK requests, select yes. Otherwise, select no. Defaults to no. The external SIP port number. 102 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 105
NAT Configuring SIP 5 Parameter Description Auth Resync-Reboot If this feature is enabled, the Cisco IP phone authenticates the sender when it receives the NOTIFY resync reboot (RFC 2617) message. To use this feature, select yes. Otherwise, select no. Defaults to yes. SIP Proxy-Require The SIP - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 106
to 0. Sticky 183 If this feature is enabled, the IP telephony ignores further 180 SIP responses after receiving the first 183 SIP response for an outbound INVITE. To enable this feature, select yes. Otherwise, select no. Defaults to no. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 107
SIP proxy and registration parameters: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Extension tab. STEP 4 Configure the proxy and registration parameters for each extension. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 108
registration based on that lower value instead of the configured value. If registration fails with an "Expires too brief" error response, the phone retries with the value specified in the Min-Expires header of the error. Defaults to 60 seconds. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 109
and NAT Configuring SIP 5 Parameter Description Ans Call Without Reg If enabled, the user does not have to be registered with the proxy to answer calls. Defaults to no. Use DNS SRV Enables DNS SRV lookup for the proxy and outbound proxy. Defaults to no. DNS SRV Auto Prefix Enables the phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 110
-bit public key of the CA signing the MC of all subscribers in the group. Defaults to blank. Base64 encoded of the 512-bit private key per subscriber for establishment of a secure call. Defaults to blank. STEP 5 Click Submit All Changes. 108 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 111
. STEP 5 (Optional) To configure the phone to automatically detect the protocol being used on the network to which it is connected, in the SPA525-auto-detect-sccp field, choose yes. STEP 6 Click Submit All Changes. Network Address Translation (NAT) and Cisco IP Phones NAT is a function that allows - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 112
5 Configuring SIP, SPCP, and NAT Network Address Translation (NAT) and Cisco IP Phones NAT Mapping with Session Border Controller It is strongly recommended that you choose an ITSP that supports NAT mapping through a Session Border Controller. With NAT mapping provided by the ITSP, you have more - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 113
Configuring SIP, SPCP, and NAT Network Address Translation (NAT) and Cisco IP Phones 5 STEP 3 Under NAT Support Parameters, configure the following: • Handle VIA received, Insert VIA received, Substitute VIA Addr: yes • Handle VIA rport, Insert VIA rport, Send Resp To Src Port: yes • EXT IP: Enter - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 114
NAT ports open permanently. Check with your ITSP to determine the requirements. STEP 6 Click Submit All Changes. NOTE You also need to configure the firewall settings on your router to allow SIP traffic. See "Configuring SIP," on page 89. 112 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 115
7 Set SIP Debug Option to Full. The default output is named syslog.514.log (if not port number was specified). STEP 8 To collect information about what type of NAT your router uses click the SIP tab and scroll to NAT Support Parameters. Cisco SPA and Wireless IP Phone Administration Guide 113 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 116
Test Enable drop-down box. View the debug messages to determine if your network uses symmetric NAT. Look for the Warning header in REGISTER messages, for example, Warning: 399 Spa "Full Cone NAT detected." STEP 10 Click Submit All Changes. 114 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 117
this challenge is to restrict the SIP servers that are permitted to interact with the devices on the service provider network, which significantly increases the security of the VoIP network by preventing malicious attacks against the device. Cisco SPA and Wireless IP Phone Administration Guide 115 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 118
1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click Ext , then scroll to the SIP Settings section. STEP 4 Select TLS from the SIP Transport drop-down box. STEP 5 Click Submit All Changes. 116 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 119
can also be configured from the User tab, under Supplementary Services. Users can enter *18 to Secure Next Call-Uses encrypted media for the next outbound call (on this call appearance only). This star code is redundant if all outbound calls are secure by default. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 120
configure it on the Regional web page under Call Progress Tones. Defaults to 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2) Ensuring Voice Quality Voice quality perceived by the subscribers of the IP Telephony service should be indistinguishable from that of the PSTN. Cisco IP phones support several - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 121
G.723.1 is not supported on the 525G or WIP310. Supported on the SPA525G only. Only one G.722 call at a time is allowed. If a conference call is placed, a SIP re-invite message is sent to switch the calls to narrowband audio. 4.3 (approx) Cisco SPA and Wireless IP Phone Administration Guide 119 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 122
, a total of seven (7) simultaneous conversations can be reliably supported with adequate bandwidth available for file downloads. Cisco recommends using the Cisco IP phones with QoS-capable networking equipment that can prioritize the VoIP application traffic. QoS features are available on many data - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 123
effect of packet loss. • Network jitter-The IP network can induce varying delay of received packets. The RTP receiver in Cisco IP phones keeps a reserve of samples to absorb the network jitter, instead of playing out all the samples as soon Cisco SPA and Wireless IP Phone Administration Guide 121 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 124
quality. Cisco IP phones dynamically adjust the size of the jitter buffer according to the network conditions that exist during a call. The end delay larger than 300 ms is unacceptable to most callers. Cisco IP phones support end-to-end delays well within acceptable thresholds. • Adjustable Audio - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 125
: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Ext tab for the extension you want to configure. STEP 4 Under Audio Configuration, configure the following parameters: Cisco SPA and Wireless IP Phone Administration Guide 123 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 126
. NOTE: Not applicable to the WIP310. If the second codec fails, this codec is tried. Defaults to unspecified. NOTE: Not applicable to the WIP310. To enable the use of the G.729a codec at 8 kbps, select yes. Otherwise, select no. Defaults to yes. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 127
in outbound SDP. Defaults to yes. Silence Supp Enable To enable silence suppression so that silent audio frames are not transmitted, select yes. Otherwise, select no. See "Ensuring Voice Quality" section on page 118. Defaults to no. Cisco SPA and Wireless IP Phone Administration Guide 125 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 128
respond to. Separate with semicolons. STEP 5 Click Submit All Changes. Configuring DHCP, Static IP, and PPPoE Information STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the System tab. 126 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 129
not applicable to WIP310. STEP 5 Click Submit All Changes. Setting a Static IP Address If you configured Static IP as the internet connection type: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. Cisco SPA and Wireless IP Phone Administration Guide 127 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 130
2 Click Admin Login and advanced. STEP 3 Click the System tab. STEP 4 Configure the following fields: Parameter PPPoE Login Name Description Specifies the account name assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. 128 Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 131
, see Configuring Lightweight Directory Access Protocol (LDAP), page 77. DNS server used by the phone in addition to DHCP supplied DNS servers if DHCP is enabled; when DHCP is disabled, this is the secondary DNS server. Defaults to 0.0.0.0. Cisco SPA and Wireless IP Phone Administration Guide 129 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 132
only. IP address or name of primary NTP server. The phones use these servers to synchronize its time. Defaults to blank. IP address or name of secondary NTP server. The phones use these servers to synchronize its time. Defaults to blank. 130 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 133
, Cisco discovery protocol (CDP) is enabled (this is the default). CDP is negotiation-based and determines which VLAN the IP phone resides in. CDP: • Obtains the protocol addresses of neighboring devices and also discovers the platform of those devices. • Shows information about the interfaces your - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 134
modifies the frame priority only if the incoming frame priority is higher than this value. 0-4095 (default 0). Value of the VLAN ID. The phone tags all the untagged frames coming from the PC (it will not tag frames with an existing tag). 132 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 135
and service providers should refer to other documentation, depending on your configuration: • Cisco SPA Provisioning Guide (service provider login required) • Cisco SPA9000 Voice System Administration Guide • Service provider documentation Cisco SPA and Wireless IP Phone Administration Guide 133 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 136
Configuration from Phone Keypad Remote provisioning can be performed from a phone keypad. After the user enters the IP address of the provisioning server, the unit resyncs to a known path name. This feature enables service providers to have VARs install and provision Cisco phones. 134 Cisco SPA - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 137
3 Navigate to profile rule. Enter the profile rule in the following format: protocol://server[:port]/profile_pathname For example, to have the WIP310 provisioning done by the Cisco SPA9000 Voice System, enter: 192.168.2.64/cfg/generic.xml Cisco SPA and Wireless IP Phone Administration Guide 135 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 138
7 Provisioning Basics IP Phone Configuration Profiles SPA525G STEP 1 Press the Setup button. STEP 2 Scroll to Device Administration and press Select. STEP 3 Scroll to Profile Rule and press Select. STEP 4 Enter the profile rule using the following format, then press the Resync soft button. - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 139
in provisioning and upgrade rules. They are referenced by prepending the variable name with a '$' character, such as $GPP_A. You can optionally Require Admin Password to Reset Unit to Factory Defaults (see last line of sample config file). Cisco SPA and Wireless IP Phone Administration Guide 137 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 140
to factory defaults by setting the last line parameter to "yes." If you are a service provider with a password, see the Cisco SPA Provisioning Guide. Upgrading, Resyncing, and Rebooting Phones Cisco IP phones support secure remote provisioning and firmware upgrades. You can generate configuration - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 141
be set to Yes: Cisco IP phone web UI: Provisioning > Firmware Upgrade > Upgrade Enable: yes Use the following syntax to upgrade firmware on a phone: http://phone-ip-address/admin/upgrade?protocol://servername[:port]]/firmware-path • Protocol defaults to TFTP. • Server name is the host requesting - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 142
than or equal to this parameter. The default is (empty). Upgrade_Rule This parameter is a firmware upgrade script with the same syntax as Profile_Rule. Defines upgrade conditions and associated firmware URLs. The default is (empty). 140 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 143
on power up. NOTE: The phone resyncs only when it is idle. Use the following syntax to resync a phone's profile to a profile on a TFTP, HTTP, or HTTPS server: http://phone-ip-addr/admin/resync?protocol://servername[:port]/profile-pathname Cisco SPA and Wireless IP Phone Administration Guide 141 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 144
251/spaconf.cfg). Rebooting a Phone You can remotely reboot a Cisco IP phone if needed. Use the following syntax to reboot a phone: http://phone-ip-address/admin/reboot Redundant Provisioning Servers The provisioning server may be specified as an IP address or as a fully qualified domain name (FQDN - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 145
.com/cisco-init For both initial and permanent access, the provisioning server relies on the Cisco IP phone client certificate for authentication and supplies correct configuration parameter values based on the associated service account.1-5 Automatic In-House Preprovisioning Using the web UI - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 146
The Cisco IP phone supports a more convenient mechanism for in-house preprovisioning. With the factory default configuration, a Cisco IP phone automatically tries to resync to a specific file on a TFTP server, whose IP address is offered as one of the DHCP-provided parameters. This lets a service - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 147
, to obtain the Cisco IP phone configuration profile from the provisioning server. To prevent this kind of attack, each Cisco IP phone also carries a unique client certificate, also signed by Cisco, including identifying information about Cisco SPA and Wireless IP Phone Administration Guide 145 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 148
email address so that customer support can contact you if needed. This email address is visible in the CSR. STEP 4 Email the CSR (in zip file format) to the Cisco/Linksys support person. The certificate is signed by Cisco and given to you. 146 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 149
(sec), page 152 • Vertical Service Announcement Codes (SPA 9X2 only), page 158 • Using a Dial Plan, page 161 • Miscellaneous Parameters, page 164 • Localizing Your IP Phone, page 165 • Selecting a Display Language, page 169 Cisco IP phones have configurable call progress tones. Parameters for each - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 150
8 Configuring Regional Parameters and Supplementary Services Advanced Scripting for Cadences, Call Progress Tones, and Ring Tones Advanced Scripting for Cadences, Call Progress ,4/offi,4/ fi,4 [,oni,5/offi,5/fi,5 [,oni,6/offi,6/fi,6]]]]]) 148 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 151
Configuring Regional Parameters and Supplementary Services Advanced Scripting for Cadences, Call Progress Tones, and Ring Tones 8 where fi,j = n1[+n2]+n3[+n4[+n5 Segment 4: On=0s, Off=4s, with no frequency components Total Tone Length = 20s Cisco SPA and Wireless IP Administration Phone Guide 149 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 152
, such as b=2.5 total-time specifies the total number of seconds to play the ring tone before it times out Example 1: SIT Tone n=Classic-1,w=3;c=1 n=Simple-1,w=2;c=1 150 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 153
Ring cadence defines the ringing pattern that announces a telephone call. NOTE: The WIP310 has only eight distinctive ring pattern fields. Ring Pattern Notes The default cadence script for eight ring patterns is shown in the figure above. Cisco SPA and Wireless IP Administration Phone Guide 151 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 154
30. Delay after receiving the first SIP 18x response before declaring the remote end is ringing. If a busy response is received during this time, the Cisco IP phone still considers the call as failed and keeps on retrying. Defaults to 0.5. 152 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 155
. Range: 0-64 seconds. Defaults to 3. Configuring Supplementary Services (Star Codes) The Cisco IP phones provides native support of a large set of enhanced or supplementary services (also known as star codes). A user can enter star codes (such as *21 for call forward, followed by the target number - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 156
on busy. Applies to primary extension only. • Call Forward No Answer Act (*92)-Call forwards if no answer. Applies to primary extension only. • Call Forward No Answer Deact (*93)-Cancels call forward no answer. Applies to primary extension only. 154 Cisco SPA and Wireless IP Administration Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 157
extensions. • Secure One Call Act (*18)-Prefers to use encrypted media for the outbound call (on this call appearance only). • Secure One Call Deact (*19)-Prefers to use unencrypted media for the outbound call (on this call appearance only). Cisco SPA and Wireless IP Administration Phone Guide 155 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 158
codes internally processed by the Cisco IP phone. You can delete any * code that you do not want to SPA9000 to process. Feature Dial Services Codes: Tells the Cisco IP phone what to do when the user is listening to the first or second dial tone. Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 159
, the Cisco IP phone plays the prompt tone by default. If the * code is not to be followed by a phone number, such as *73 to cancel call forwarding, do not include it in this parameter. In that case, add that * code in the dial plan. Cisco SPA and Wireless IP Administration Phone Guide 157 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 160
if • the user has not subscribed for it or • the service provider intends to support similar service using other means than relying on the Cisco IP phone. Vertical Service Announcement Codes (SPA 9X2 only) SPA9x2 phones support all services that can be activated on a phone (call forward, do not - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 161
: Call forward all service enabled; FAF: Call forward all service disabled; FBT: Call forward busy service enabled; FBF: Call forward busy service disabled; FNT: Call forward no answer enabled; FNF: Call forward no answer disabled; When the user enables call waiting service, the SPA9x2 automatically - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 162
is the name of service plus the current condition; SA_extcode is the extension code which the ANNC server will route to. Appendix: SA_serv list 1) Call Back CBT: Call back enabled CBF: Call back disabled CBB: Call back busy enabled 2) Call Forward FAT: Call forward all enabled FAF: Call forward all - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 163
. They also determine whether the dialed number is accepted or rejected. You can use a dial plan to facilitate dialing or to block certain types of calls such as long distance or international. Cisco SPA and Wireless IP Administration Phone Guide 161 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 164
extensions: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Ext tab. STEP 4 Under Dial Plan, configure the dial plan parameters. See the following table for information: 162 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 165
The phone is restored to normal after the call is terminated and the SPA9X2 is back on-hook. Maximum number length is 63 characters. Defaults to blank (no emergency number). NOTE Not applicable to WIP310. STEP 5 Click Submit All Changes. Cisco SPA and Wireless IP Administration Phone Guide 163 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 166
SPA 9X2 WIP310 DTMF Notes Dual Tone Multi-Frequency (DTMF) is the system used by touch-tone phones. DTMF assigns a specific frequency (consisting of two separate tones) to each key so that it can easily be identified by a microprocessor. 164 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 167
user presses a digit or when the phone receives an out-of-band (OOB) DTMF signal from the network side. Does not affect DTMF transmission. Defaults IP Phone The following table describes the localization parameters in the Miscellaneous section. Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 168
Configuring Regional Parameters and Supplementary Services Localizing Your IP Phone na"> Defaults to blank; the maximum number of characters is 512. For example: Spanish 166 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 169
Regional Parameters and Supplementary Services Localizing Your IP Phone 8 Managing the Time and Date Cisco IP phones obtain the current time information in one of three ways: • NTP Server-You can configure one or two NTP servers on the phone. When the phone first boots up, it tries to contact - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 170
=4/1/7/0;end=10/-1/7/0;save=1 The following example configures daylight savings time for Egypt, starting at midnight on the last Sunday in April and ending at midnight on the last Sunday of September: start=4/-1/7;end=9/-1/7;save=1 (Egypt) 168 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 171
, the phone checks the selected language and downloads the dictionary from the TFTP/HFTP provisioning server indicated in the phone's configuration. The dictionaries are available at the following website: http://www.cisco.com/go/smallbiz Cisco SPA and Wireless IP Administration Phone Guide 169 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 172
of the phone on the phone by following these steps: STEP 1 Press the Setup button. STEP 2 Select Language, then press the Select soft button. STEP 3 Select Option to change the language. STEP 4 With the desired language selected, press Save. 170 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 173
Configuring Regional Parameters and Supplementary Services Localizing Your IP Phone 8 Creating a Dictionary Server Script The na" serv=tftp://192.168.1.119/ ;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.xml / Dictionary_Server_Script Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 174
8 Configuring Regional Parameters and Supplementary Services Localizing Your IP Phone 172 Cisco SPA and Wireless IP Administration Phone Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 175
a separate power supply. Two SPA932 units can be attached to a single phone to monitor a total of 64 separate lines. For more information about installing and configuring the SPA932 with a Cisco SPA9000 system, see the Cisco SPA9000 Voice System Installation and Configuration Guide. This chapter - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 176
and LEDs. . Port/LED AUX IN AUX OUT Green Red Blinking Red Orange Off Meaning Connects to the phone. Connects to a second SPA932 unit (optional) Idle In-use Ringing Solid: not registered. Blinking: configuration error. Not configured 174 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 177
connects it to the phone. For instructions on installing the SPA932 and an introduction to its use, refer to the 32 Button Attendant Console for the SPA962 IP Phone Quick Installation Guide or the Cisco Small Business Pro SPA525G User Guide (SIP), available on Cisco.com. STEP 2 Configure one of the - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 178
Changes. Configuring the BroadSoft Server for the SPA932 The BroadSoft server requires you to assign IP phone users to the Busy Lamp (BLF) Monitor Users List. The BroadSoft server sends updates on the status of each phone on this list to the SPA932, which subscribes for this service. To configure - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 179
Users list. You use this DN to identify the specific phone assigned to each key on the SPA932. STEP 6 Save and enable your configuration changes on the BroadSoft server. See also the "Configuring BroadSoft Busy Lamp Field Auto-Configuration (SPA525G)" section on page 182. Configuring the Asterisk - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 180
SPA932 or Attendant Console tab, check your firmware version, and upgrade as necessary.) STEP 6 Select yes from the Unit 1 Enable drop-down list. If you have installed two SPA932 units, also select yes from the Unit 2 Enable drop-down list. 178 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 181
for monitoring line activity • sd-speed dial function • cp-call pickup (if supported by the SIP proxy server). Call pickup (cp) must be supported by the SIP proxy server and be used with blf in the configuration. The syntax is fnc=blf+cp. Cisco SPA and Wireless IP Phone Administration Guide 179 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 182
corresponding to each of the six extensions available on the phone. Only use the vid= keyword in the first entry assigned to each phone extension. Subsequent keys will use the same extension. See "SPA932 Parameter Notes" section on page 183. 180 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 183
in the Cisco SPA9000 Voice System Installation and Configuration Guide. The following entry enables speed dialing, BLF monitoring, and call pick up on a SPA9000 server with: • IP address 192.168.1.101 • station name phone1 • extension 101 • SPA932 unit/key using the phone's extension 2 Example - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 184
automatically generate configuration scripts for BLF keys for all users on the monitored list. To configure BLF auto-configuration: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login. STEP 3 Click advanced. STEP 4 Click the Att Console tab. 182 Cisco SPA and Wireless IP - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 185
the first SPA932 unit (each phone can have up to two SPA932 units attached). Length of delay before attempting to subscribe. Defaults to 1. Enables or disables the second SPA932 unit (each phone can have up to two SPA932 units attached). Cisco SPA and Wireless IP Phone Administration Guide 183 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 186
are returned to off, all the keys become orange. The phone must be rebooted after the test is completed. The star code used for picking up a ringing call. Defaults to *98. Automatically configures BLF subscriptions for all users on a monitored list. Enter a strings that define the extension and - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 187
configured for each key (132) on the SPA932 attendant console unit. Displays the subscription status of the unit/key. The value can be Yes, Fail, or No. No indicates that the feature/function (fnc) of that line does not require a subscription (such as speed dial). Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 188
9 Configuring the SPA932 Attendant Console Monitoring the SPA932 186 Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 189
= . The allowed field-name and user-defined blinking pattern used only when p = ud. It consists of up to 4 pairs of on/off duration in seconds with up to 2 decimal places; each value is separated by a forward slash (/). Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 190
pattern is steady on (default). Example 4 c=a;p=ud call on this call appearance • Local Ringing: This station is ringing for an incoming call on this call appearance • Local Held: This station has placed this call appearance on hold Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 191
station is attempting registration with the proxy server for the corresponding extension. • Disabled: This line key on this station is disabled • Call Back: A call back (repeat dialing) operation is currently active on this call appearance Cisco SPA and Wireless IP Phone Administration Guide 189 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 192
197 • SIP Tab, page 202 • Regional Tab, page 216 • Phone Tab, page 236 • User Tab, page 266 • SPA932 Status, page 273 • SPA525G-Specific Tabs, page 274 NOTE: For information about the Provisioning page, see the Cisco SPA Provisioning Guide. Cisco SPA and Wireless IP Phone Administration Guide 190 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 193
(defaults to SipuraSPA). Displays the network domain name of the SPA9000. Displays the network mask assigned to the SPA9000. Displays the default router assigned to the SPA9000. Displays the primary DNS server assigned to the SPA9000. Cisco SPA and Wireless IP Phone Administration Guide 191 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 194
, or name of the wireless router to which the phone is connected. Standard Channel (SPA525G Shows the wireless channel being used in the wireless only) connection. Security Mode (SPA525G only) Shows if wireless security is configured on the phone (yes or no). Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 195
Parameter Product Name Serial Number Software Version Hardware Version MAC Address Client Certificate Customization Licenses Phone Status Parameter Current Time Elapsed Time Broadcast Pkts Sent Broadcast Bytes Sent Broadcast Pkts Recv Cisco SPA and Wireless IP Phone Administration Guide Description - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 196
of SIP messages sent (including retransmissions). Total number of bytes of SIP messages received (including retransmissions). External IP address used for NAT mapping. ID of the VLAN currently in use if applicable. NOTE Not applicable to WIP310. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 197
mail waiting: Yes or No. This is updated when voice mail notification is received. Port number of the SIP port mapped by NAT. Line/Call Status The following parameters show for each line and call on the phone. Parameter Call State Tone Encoder Decoder Type Remote Hold Callback Peer Name Cisco SPA - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 198
Ring Tone Parameter Status Ring Tone 1 Ring Tone 2 Cisco SPA and Wireless IP Phone Administration Guide Description Indicates whether the phone is downloading a ring tone (and from where) or if it is idle. Information about the user downloaded ring tone 1: name, size, and time-stamp of the tone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 199
Defaults to 80. Lets you enable or disable local access to the web user interface. Select yes or no from the drop-down menu. Defaults to yes. Password for the administrator. Defaults to no password. Password for the user. Defaults to no password. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 200
chosen as the type of internet connection, displays the static IP address assigned to the phone. If static IP was chosen as the type Default router IP address. Blank if DHCP assigned. LAN Maximum Transmission Unit size. Default value: 1500. Cisco SPA and Wireless IP Phone Administration Guide 198 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 201
the service name assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. Optional Network Configuration Parameter Host Name Domain Description The host name of the SPA9000. The network domain of the SPA9000. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 202
information is generated. Zero (0) means no debug information is generated. To log SIP messages, you must set the Debug Level to at least 2. Defaults to 0. IP address or name of primary NTP server. IP address or name of secondary NTP server. Cisco SPA and Wireless IP Phone Administration Guide 200 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 203
BT SPA525-readonly Description Set to yes to enable support for Bluetooth devices on the SPA525G. If set to yes, the Wi-Fi settings on the phone are read only. If set to no, the Wi-Fi settings on the phone can be changed by the end user. Cisco SPA and Wireless IP Phone Administration Guide 201 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 204
Payload Types, page 211 • NAT Support Parameters, page 214 • Linksys Key System Parameters, page 216 SIP Parameters Parameter Max Forward Max Redirection Max Auth SIP User Agent Name SIP Server Name Description SIP Max Forward value, which can range from 1 to 255. Defaults to 70. Number of times - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 205
the IP phone to enclose the string (configured in the Display Name) in a pair of double quotes for outbound SIP messages. Any occurrences of or \ in the string is escaped with \ and \\ inside the pair of double quotes. Otherwise, select no. Defaults to yes. Enables Sylantro call features. Cisco SPA - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 206
registration after the next software reboot. If set to no, the Cisco IP phone tries to use the same call-ID for registration after the next software reboot. The Cisco IP phone always uses a new random Call-ID for registration after a power-cycle, regardless of this setting. Defaults to no. Mark All - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 207
T1 value (RTT estimate), which can range from 0 to 64 seconds. Defaults to .5 seconds. RFC 3261 T2 value (maximum retransmit interval for non-INVITE requests and INVITE responses), which can range from 0 to 64 seconds. Defaults to 4 seconds. Cisco SPA and Wireless IP Phone Administration Guide 205 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 208
the proxy in the Min-Expires header. If the value is larger than this setting, the maximum value is used. Defaults to 7200. Interval to wait before the SPA9000 retries registration after failing during the last registration. Defaults to 30. Cisco SPA and Wireless IP Phone Administration Guide 206 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 209
registration fails with a SIP response code that does not match, the SPA9000 waits for the specified Defaults to 7200. This value (in seconds) determines the retry interval when the last Subscribe request fails. Defaults to 10. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 210
SPA and Wireless IP Phone Field Reference SIP Tab B NOTE: Cisco IP phones can use a RETRYAFTER value when received from a SIP proxy server that is too busy to process a request (503 Service Unavailable message). If the response message includes a RETRY-AFTER header, the phone waits for the - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 211
of 0.01 seconds. Defaults to 0.030. Number of successive ICMP errors allowed when transmitting RTP packets to the peer before the SPA9000 terminates the call. If value is set to 0, the SPA9000 ignores the limit on ICMP errors. Defaults to 0. Cisco SPA and Wireless IP Phone Administration Guide 209 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 212
. If enabled, sends RTP packets to the source address and port of the last received valid inbound RTP packet. If disabled (or before the first RTP packet arrives) sends RTP to the destination as indicated in the inbound SDP. Defaults to no. Cisco SPA and Wireless IP Phone Administration Guide 210 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 213
the codec by the configured codec names. Comparison is case-insensitive Defaults to 101. INFOREQ dynamic payload type. Defaults to blank. G.726-16 dynamic payload type. Ranges from 96-127. Defaults to 98. NOTE Not applicable to SPA525G/WIP310. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 214
G729a, G722. Defaults to G711u. AVT Codec Name AVT codec name used in SDP. Defaults to telephone-event. G711u Codec Name G.711u codec name used in SDP. Defaults to PCMU. G711a Codec Name G.711a codec name used in SDP. Defaults to PCMA. Cisco SPA and Wireless IP Phone Administration Guide 212 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 215
codec name used in SDP. Defaults to G729a. G.729b codec name used in SDP. Defaults to G729ab. G.723 codec name used in SDP. Defaults to G723. NOTE Not supported on the WIP310 or SPA525G. EncapRTP codec name used in SDP. Defaults to encaprtp. Cisco SPA and Wireless IP Phone Administration Guide 213 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 216
. Sends responses to the request source port instead of the VIA sent-by port. Select yes or no from the dropdown menu. Defaults to no. Enables the use of STUN to discover NAT mapping. Select yes or no from the drop-down menu. Defaults to no. Cisco SPA and Wireless IP Phone Administration Guide 214 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 217
If this value is not zero, the RTP port number in all outgoing SIP messages is substituted for the corresponding port value in the external RTP port range. Defaults to blank. Interval between NAT-mapping keep alive messages. Defaults to 15. Cisco SPA and Wireless IP Phone Administration Guide 215 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 218
. The multicast address is used by the SPA9000 to communicate with the SPA IP phones. Defaults to 224.168.168.168:6061. The choices are: none, G.711u, or G.711a. Defaults to none. Provisioning Tab For information about the Provisioning page, see the Cisco SPA Provisioning Guide. Regional Tab This - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 219
times out. Defaults to 480@-19,620@-19;10(.25/.25/1+2). Played when the caller has not properly placed the handset on the cradle. Off Hook Warning Tone is played when Reorder Tone times out. Defaults to 480@10,620@0;10(.125/.125/1+2). Cisco SPA and Wireless IP Phone Administration Guide 217 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 220
Tone Cfwd Dial Tone Cisco SPA and Wireless IP Phone Administration Guide Description Played during an outbound call when the far end is ringing. Defaults to 440@-19,480@-19;*(2/4/1+2). Played when a call is waiting. Defaults to 440@10;30(.3/9.7/1) Brief tone to notify the user that the last input - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 221
05/1). NOTE WIP310 and SPA525G only. Distinctive Ring Patterns Parameter Cadence 1 Cadence 2 Description Cadence script for distinctive ring 1. Defaults to 60(2/4). Cadence script for distinctive ring 2. Defaults to 60(.3/.2, 1/.2,.3/4. Cisco SPA and Wireless IP Phone Administration Guide 219 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 222
Delay after far end hangs up before reorder tone is played. 0 = plays immediately, inf = never plays. Range: 0-255 seconds. Defaults to 5. Expiration time in seconds of a call back activation. Range: 0-65535 seconds. Defaults to 1800. Cisco SPA and Wireless IP Phone Administration Guide 220 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 223
automatically appended to the dial plan. Parameter Call Return Code Blind Transfer Code Description This code calls the last caller. Defaults to *69. Begins a blind transfer of the current call to the extension specified after the activation code. Defaults to *98. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 224
forwarding of no-answer calls. Defaults to *93. Enables call waiting on all calls. Defaults to *56. Disables call waiting on all calls. Defaults to *57. Enables call waiting for the next call. Defaults to *71. Disables call waiting for the next call. Defaults to *70. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 225
call secure. (It is redundant if all outbound calls are secure by default.) Defaults to *18. Secure One Call Deact Code Makes the next outbound call not secure. (It is redundant if all outbound calls are not secure by default.) Defaults to *19. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 226
up a ringing call. Defaults to *36. The star code used for picking up a call from the call park. Defaults to *39. The star code used for picking up a group call. Defaults to *37. The star code used for media loopback. Defaults to *03. Cisco SPA and Wireless IP Phone Administration Guide 224 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 227
SPA and Wireless IP Phone Field Reference Regional Tab B Parameter Referral Services Codes Description These codes tell the SPA9000 what to do when the user places the current call on hold and is listening to the second dial tone. One or more *code can be configured into this parameter, such as * - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 228
tone by default. If the *code is not to be followed by a phone number, such as *73 to cancel call forwarding, do not include it in this parameter. In that case, simple add that *code in the dial plan and the SPA9000 send INVITE *73@..... as usual when user dials *73. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 229
SPA and Wireless IP Phone Field Reference Regional Tab B Vertical Service Announcement Codes • Service Annc (Announcement) Base Number: Defaults to blank. • Service Annc (Announcement) Extension Codes: Defaults to blank. Outbound Call Codec Selection Codes These codes automatically appended to the - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 230
codec for the associated call. Defaults to *0172616. NOTE Not applicable to WIP310 or SPA525G. Makes this codec the only codec that can be used for the associated call. Defaults to *0272616. NOTE Not applicable to WIP310 or SPA525G. Cisco SPA and Wireless IP Phone Administration Guide 228 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 231
call. Defaults to *0272640. NOTE Not applicable to WIP310 or SPA525G. Makes this codec the preferred codec for the associated call. Defaults to *01729. Makes this codec the only codec that can be used for the associated call. Defaults to *02729. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 232
..., GMT+13:00. Defaults to GMT-08:00. Update Status Description See "Dictionary Server Script" in Miscellaneous, page 231. See "Language Selection" in Miscellaneous, page 231. Choose a subset of the language. Status of the dictionary loading. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 233
:00,..., GMT, GMT+01:00, GMT+02:00, ..., GMT+13:00. Defaults to GMT-08:00. NOTE Found in the Time section for the SPA525G. This specifies the offset from GMT to use for the local system time. NOTE Found in the Time section for the SPA525G. Cisco SPA and Wireless IP Phone Administration Guide 231 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 234
SPA and Wireless IP Phone Field Reference Regional Tab B Parameter Daylight Saving Time Rule Description Enter the rule for calculating daylight before the end of the month (in other words the last occurrence of < weekday> in that month). Cisco SPA and Wireless IP Phone Administration Guide 232 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 235
-16. DTMF Playback Length Local DTMF playback duration in milliseconds. Defaults to .1. Inband DTMF Boost Controls the amount of amplification applied DTMF signals. Choices are OdB, 3dB, 6dB, 9dB, 12dB, 15dB, or 18dB. Defaults to 12dB. Cisco SPA and Wireless IP Phone Administration Guide 233 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 236
associated dictionary. The syntax is as follows: Defaults to blank and the maximum number of characters is 512. =; d9=;x9=; Cisco SPA and Wireless IP Phone Administration Guide 234 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 237
. Specifies the default language. The value needs to match one of the languages supported by the dictionary na"> Spanish NOTE Not applicable to the WIP310. Choose a subset of the language. Status of the dictionary loading. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 238
or URL to check voice mail. Note that The service provider often hosts a voice mail service. The advantages of hosted voice mail include: • Advanced features such as voice mail to email conversion. • Calls can go to voice mail when the broadband connection is down. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 239
in the User tab. See Screen (SPA525G), page 269. Select from Default, BMP Picture, or None. Defaults to Default. NOTE Not applicable to the WIP310. On the SPA525G, this setting is located in the User tab. See Screen (SPA525G), page 269. Cisco SPA and Wireless IP Phone Administration Guide 237 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 240
User tab on the SPA525G. URL from which to download a .jpg file for the phone logo display. URL from which to download a .jpg file for the phone wallpaper. Enables sending and receiving of SMS text messages on the phone. NOTE WIP310 only. Cisco SPA and Wireless IP Phone Administration Guide 238 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 241
, Call Pickup, and Speed Dial Functions to Idle Lines on the SPA9X2 or SPA525G. Syntax is: fnc=type;sub=stationname@$PROXY;ext=ex tension#@$PROXY where: • fnc: function • blf: busy lamp field • cp: call pickup • sub: station name • ext: extension Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 242
, elapses, the IP phone initiates a new subscription. Defaults to 1800. Specifies the length of time to wait to try again if subscription fails. Length of delay before attempting to subscribe. Defaults to 1. Selects the type of server used (SPA9000, BroadSoft, or Asterisk). Miscellaneous Line Key - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 243
LED pattern during the Local Progressing state, where this station is attempting on this call appearance an outgoing call that is in proceeding (i.e. the called number is ringing). Leaving this entry blank indicates the default value of c=r. Cisco SPA and Wireless IP Phone Administration Guide 241 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 244
or outgoing call). Leaving this entry blank indicates the default value of c=o. LED Pattern when the corresponding extension is trying to register with the proxy server. Leaving this entry blank indicates the default value of c=r;p=s. Cisco SPA and Wireless IP Phone Administration Guide 242 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 245
-anonymous-call service. Defaults to yes. Enable/disable call-back (a.k.a. repeating dialing) service. Defaults to yes. Enable/disable blocking outbound Caller-ID service. Defaults to yes. Enable/disable secure-call service. Defaults to yes. Cisco SPA and Wireless IP Phone Administration Guide 243 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 246
service. Defaults to yes. The extension used for handling ACD calls. Select from 1, 2, 3, 4, 5, or 6. Defaults to 1. Enable/disable sending announcement requests to a customer-supplied announcement server. Defaults to no. Enable/disable the web server. Defaults to yes. Cisco SPA and Wireless IP - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 247
Ring tone script for ring 7. Defaults to n=Simple3;w=2;c=3. Ring tone script for ring 8. Defaults to n=Simple4;w=2;c=4. Ring tone script for ring 9. Defaults to n=Simple5;w=2;c=5. Ring tone script for ring 10. Defaults to n=Office;w=4;c=1. Cisco SPA and Wireless IP Phone Administration Guide 245 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 248
. Defaults to zero. Handset Additional Input Gain Applies additional input gain to the handset. Headset Additional Input Gain Applies additional input gain to the headset. Speakerphone Additional Input Gain Applies additional input gain to the speakerphone. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 249
SPA525G supports the BroadSoft directory feature and synchronization of Do Not Disturb and Call Forward. The following configuration fields are available: Parameter Directory Enable XSI Host Server Directory Name Description Set to yes to enable BroadSoft directory for the phone user. Defaults to - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 250
SPA and Wireless IP Phone Field Reference Phone Tab B Parameter Directory Type Directory UserID Directory Password Call Feature Sync Ext Description Select the type of BroadSoft directory: • Enterprise (default): Allows users to search on last name, first name, user or group ID, phone number, - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 251
domain name and password to the LDAP server. May present security issues. • Digest-MD5-The LDAP server sends authentication options and a token to the client. The client returns an encrypted response that is decrypted and verified by the server. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 252
SPA and Wireless IP Phone Field Reference Phone Tab Parameter LDAP Client DN LDAP Username LDAP Password LDAP Search Base LDAP Last Name Filter LDAP First Name Filter LDAP Search Item 3 LDAP Item 3 Filter LDAP Search Item 4 LDAP Item 4 Filter B Description Enter the distinguished name domain - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 253
server. For example, you can append 9 to the number if your dial plan requires a user to enter 9 before dialing. If you do not manipulate the number in this fashion, a user can use the Edit Dial feature to edit the number before dialing out. Cisco SPA and Wireless IP Phone Administration Guide 251 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 254
the line to which the setting applies. For example: [1] to specify line one [2] to specify line two General Line Enable: To enable this line for service, select yes. Otherwise, select no. Defaults to yes. Cisco SPA and Wireless IP Phone Administration Guide 252 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 255
To use externally mapped IP addresses and SIP/RTP ports in SIP messages, select yes. Otherwise, select no. Defaults to no. To send the configured NAT keep alive message periodically, select yes. Otherwise, select no. Defaults to no. Cisco SPA and Wireless IP Phone Administration Guide 253 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 256
field value in UDP IP packets carrying a SIP message. Defaults to 0x68. CoS value for SIP messages. Defaults to 3. ToS/DiffServ field value in UDP IP packets carrying RTP data. Defaults to 0xb8. CoS value for RTP data. Defaults to 6. Cisco SPA and Wireless IP Phone Administration Guide 254 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 257
port. Defaults to 5060. To enable the support of 100REL SIP extension for reliable transmission of provisional responses (18x) and use of PRACK requests, select yes. Otherwise, select no. Defaults to no. The external SIP port number. Cisco SPA and Wireless IP Phone Administration Guide 255 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 258
Delay, enter the appropriate period of time in seconds. Defaults to 4. To contact the refer-to target, select yes. Otherwise, select no. Default: no For the Referee Bye Delay, enter the appropriate period of time in seconds. Defaults to 0. Cisco SPA and Wireless IP Phone Administration Guide 256 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 259
. Defaults to 0. If this feature is enabled, the IP telephony ignores further 180 SIP responses after receiving the first 183 SIP response for an outbound INVITE. To enable this feature, select yes. Otherwise, select no. Defaults to no. Cisco SPA and Wireless IP Phone Administration Guide 257 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 260
to block his callerid. Default: yes. NOTE: Not applicable to the WIP310. Configure G.729 Annex B settings. NOTE Not applicable to SPA525G. Call Feature Settings Parameter Blind Attn-Xfer Enable Cisco SPA and Wireless IP Phone Administration Guide Description Enables the IP phone to perform an - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 261
SPA and Wireless IP Phone Field Reference Ext Tab B Parameter MOH Server Message Waiting Auth Page Default Ring Auth Page Realm Conference Bridge URL Auth Page Password Mailbox ID Cisco SPA and Wireless IP Phone Administration Guide Description User ID or URL of the auto-answering streaming audio - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 262
the phone, generally the IP address and port number of the VM server. Reserved feature. Specifies whether to enable a SIP-B feature regarding the sending of a Notify to the phone when a call is forwarded elsewhere. Defaults to No. Typically, this field is configured with the SIP proxy information - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 263
on the server name. (Using multiple DNS A record per server name does not allow the notion of priority and so all hosts will be considered at the same priority and the phone will not attempt to fall back after a fail over). Defaults to 3600 Cisco SPA and Wireless IP Phone Administration Guide 261 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 264
concatenated with the 1024-bit public key of the CA signing the MC of all subscribers in the group. Defaults to blank. Base64 encoded of the 512-bit private key per subscriber for establishment of a secure call. Defaults to blank. Cisco SPA and Wireless IP Phone Administration Guide 262 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 265
the support of two Defaults to Unspecified. The third preferred codec when the preferred codec and second preferred codec cannot be used. If Use Pref Codec Only is enabled (set to yes), this parameter is not used. Defaults to Unspecified. Cisco SPA and Wireless IP Phone Administration Guide - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 266
use of the G.726 codec at 40 kbps, select yes. Otherwise, select no. Defaults to yes. Select the codec for fax passthrough, G711u or G711a. The default is G711u. Select the fax passthrough method: None, NSE, or ReINVITE. The default is NSE. Cisco SPA and Wireless IP Phone Administration Guide 264 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 267
per SPA9X2, you should disable the use of G.729a to guarantee support for two simultaneous G.723/G.726 codecs. Dial Plan The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[29]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.). Cisco SPA and Wireless IP Phone Administration Guide 265 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 268
, use NAT mapping Each parameter is separated by a semi-colon (;). Enable or disable IP dialing. Defaults to no. This section describes the fields for the following headings on the User tab: • Call Forward, page 267 • Speed Dial, page 267 • Supplementary Services, page 267 • Web Information Service - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 269
SPA and Wireless IP Phone Field Reference User Tab B Call Forward Parameter Cfwd All Dest Cfwd Busy Dest Cfwd No Ans Dest Cfwd No Ans Delay Description Enter the extensions to forward calls to. Enter the extensions to forward calls to when the line is busy. Defaults to voice mail. Enter the - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 270
SPA962. Users can change the defaults for local state, city, street, and zip code for local traffic information. Location defaults to CA, Cisco, San Jose, 95134. NOTE: Yahoo! Traffic Alerts provides this information to U.S. customers only. Cisco SPA and Wireless IP Phone Administration Guide 268 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 271
SPA and Wireless IP Phone Field Reference User Tab Audio Volume NOTE Does not apply to the WIP310. B Parameter Ringer Volume Speaker Volume Handset Volume Headset Volume Description Sets the default volume for the ringer. Sets the default volume for the full-duplex speakerphone. Sets the default - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 272
BMP Picture, or None. Defaults to Default. For more information, see the "Configuring Phone Information and Display Settings" section on page 47. Enter a number value from 1 to 30. The higher the number, the greater the contrast on the screen. Select yes to enable the screen back light. Cisco SPA - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 273
following parameters apply only to the SPA962. Choose from: • Light Blue • Light Green • Pink • Silver Defaults to Light Blue. 932 Tab (SPA962/SPA525G only) This tab includes the following sections: • General, page 272 • Unit 2, page 273 Cisco SPA and Wireless IP Phone Administration Guide 271 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 274
orange. The SPA962 must be rebooted after the test is completed. The star code used for picking up a ringing call. Defaults to *98. Automatically configures BLF subscriptions for all users on a monitored list. See Configuring BroadSoft Busy Lamp Field Auto-Configuration (SPA525G), page 182. Enter - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 275
configuration powered on and connected or not. Displays the length of time the SPA932 waits to try again if subscription fails. Displays the version of the software currently running on the unit. Displays the name assigned to each key (1-32) on the SPA932 unit. Cisco SPA and Wireless IP Phone - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 276
wireless network profile. Wireless Status Wi-Fi Profile Cisco SPA and Wireless IP Phone Administration Guide Contains information about the wireless network. Contains up to 3 wireless profiles for the phone. Includes a wireless profile for the Cisco Unified Communications Server by default. 274 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 277
SPA525G by clicking On. Personal Address Book Address book for the phone. For more information, see the Cisco Small Business Pro IP Phone SPA525G User Guide. Call History Displays the call history for the phone. To change the information displayed, select the type of call history from the drop-down - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 278
/voice Phone Support www.cisco.com/en/US/support/ tsd_cisco_small_business_support_center_contacts.html Warranty and www.cisco.com/go/warranty End-User License Agreement Open Source License Notices www.cisco.com/go/osln Cisco SPA and Wireless IP Phone Administration Guide 276 - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 279
/smb Cisco Small Business Home www.cisco.com/smb Related Documentation See document... SPA9000 Voice System Installation and Configuration Guide SPA9000 Voice System Administration Guide SPA9X2 IP Phone User Guide To learn how to... For VARs and Service Providers, describes: • Network design - Linksys SPA922 | Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 280
Business Pro IP Phone SPA525G (SIP) User Guide For VARs and end phone users, describes the installation, configuration, and use of the Cisco Small Business Pro IP Phone SPA525G for SIP call control systems. Cisco Unified Communications Manager Express for Cisco Unified IP Phone SPA525G User Guide
Cisco SPA and Wireless IP Phone
Cisco SPA525G, SPA922, SPA942, SPA962, and
WIP310
ADMINISTRATION
GUIDE