Linksys SPA922 Cisco Small Business Pro SPA and Wireless IP Phone Administrati - Page 235

SPA and Wireless IP Phone Field Reference Regional Tab B Parameter Description The value equals any value in the range 17 (Monday-Sunday). It can also equal 0. If the value is 0, this means that the date to start or end daylight saving is exactly the date given. In that case, the value must not be negative. If the value is not 0 and the value is positive, then daylight saving starts or ends on the value on or after the date given. If the value is not 0 and the value is negative, then daylight saving starts or ends on the value on or before the date given. The abbreviation HH stands for hours (0-23). The abbreviation mm stands for minutes (0-59). The abbreviation ss stands for seconds (0-59). The default Daylight Saving Time Rule is start=4/1/ 7;end=10/-1/7;save=1. NOTE Found in the Time section for the SPA525G. Daylight Savings Time Enable Select yes to enable Daylight Saving Time. NOTE Found in the Time section for the SPA525G. DTMF Playback Level Local DTMF playback level in dBm, up to one decimal place. Defaults to -16. DTMF Playback Length Local DTMF playback duration in milliseconds. Defaults to .1. Inband DTMF Boost Controls the amount of amplification applied DTMF signals. Choices are OdB, 3dB, 6dB, 9dB, 12dB, 15dB, or 18dB. Defaults to 12dB. Cisco SPA and Wireless IP Phone Administration Guide 233