MSI PT880 User Guide - Page 57

BIOS Setup Wake-Up Key This setting only works When Wake Up By Keyboard From S3 is set to [Enabled]. This setting specifies how the system will be awakened from power saving mode when input signal of the keyboard is detected. Setting options: [Any Key], [Specific Key]. Wake-Up Password This setting specifies the keyboard wake-up Password and works only when the Wake-Up Key setting is set to [Specific Key]. Resume On PS/2 Mouse From S3 The setting determines whether the system will be awakened from the S3 power saving mode when input signal of the PS/2 mouse is detected. Setting options: [Enabled], [Disabled]. Wake Up On PME# When setting to [Enabled], this setting allows your system to be awakened from the power saving modes through any event on PME (Power Management Event). Setting options: [Enabled], [Disabled]. Resume On RTC Alarm This is used to enable or disable the feature of booting up the system on a scheduled time/date from the S3, S4, and S5 state. Setting options: [Enabled], [Disabled]. Alarm Date/Hour/Minute/Second If Resume On RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields. Available settings for each item are: RTC Alarm Date 01 ~ 31, Every Day RTC Alarm Hour 00 ~ 23 RTC Alarm Minute 00 ~ 59 RTC Alarm Second 00 ~ 59 MSI Reminds You... If you have changed this setting, you must let the system boot up until it enters the operating system, before this function will work. 3-17