Magnavox NB500MG1F User manual, English (US) - Page 25
Virtual Surround, PIP (BONUSVIEW) Setting, Camera Angle, Noise reduction DVD-video only - no sound
View all Magnavox NB500MG1F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP PLAYBACK S Noise reduction (DVD-video only) Reduces the noise of the playback picture. "Off" : Shows the original picture as recorded. "1" : Executes 3D noise reduction which detects and deletes the noise by comparing each picture frames. "2" : Executes MPEG noise reduction which reduces the block noise and mosquito noise on the subtitle on movie. "3" : Executes both MPEG noise reduction and 3D noise reduction. 3 Press [RETURN] to exit. Note • The setting will remain the same even if the unit is turned to the standby mode. • For the picture output from HDMI OUT jack, "Black Level" is not effective. • You cannot adjust the setting during rapid playback. Virtual Surround You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 1 During playback, press [MODE]. 2 Use [K / L] to select your desired setting. Off "Off" : No surround effect "1" : Natural surround effect "2" : Stronger surround effect 3 Press [RETURN] to exit. Note • Set the virtual surround setting to "Off" or lower the volume if the sound is distorted. • Virtual surround does not function during rapid playback. • For the virtual surround, audio signal will always be 2-channel LPCM. PIP (BONUSVIEW) Setting Some BD-video have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODE] whenever the scene contains the secondary video. primary video secondary video 1 During playback, press [MODE] repeatedly until the PIP function appears. 2 Use [K / L] to select the secondary video you want. • The secondary video will be displayed and the secondary audio will be output. 3 Press [RETURN] or [MODE] to remove the PIP information. Note • The secondary audio will not be output when the secondary audio is set to "Off" or when "BD Audio Mode" is set to "HD Audio Output". Refer to "Switching Audio Soundtrack" on page 27 and "Setting the BD Audio Mode" on page 28. Camera Angle Some BD-video and DVD-video contain scenes which have been shot simultaneously from various angles. You can change the camera angle when screen. appears on the TV 1 During playback, press [ANGLE]. • The selected angle will be displayed on the display bar at the top of the TV screen. 2 Use [K / L] to select your desired angle. 1 / 3 Note • If "Angle Icon" setting is "Off" in "Others" menu, will not appear. Refer to page 40. OTHERS EN 25