Magnavox NB500MG1F User manual, English (US) - Page 7
Front Panel, Rear Panel, COMPONENT VIDEO OUT jacks - remote
View all Magnavox NB500MG1F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INTRODUCTION Front Panel INTRODUCTION 1 2* 3 4 5 6* 7 8 9 CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS OPEN/ CLOSE DISC IN STOP PLAY STANDBY-ON SD card (*) The unit can also be turned on by pressing these buttons. 1. Disc tray • Place a disc when opening the disc tray. 2. A OPEN/CLOSE button* • Press to open or close the disc tray. 3. DISC IN indicator • This indicator lights up in blue when a disc is in this unit. 4. Infrared sensor window • Receive signals from your remote control so that you can control the unit from a distance. 5. C STOP button • Press to stop playback. 6. B PLAY button* • Press to start or resume playback. 10 7. PLAY indicator • This indicator lights up in green when discs or SD card play back. 8. STANDBY-ON indicator • This indicator lights up in red when the power is in the standby mode. 9. Q STANDBY-ON button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.) • Press and hold for 10 seconds to shut down the unit. 10. SD card slot • Insert an SD Memory Card and play back the contents in it. Rear Panel 1 2 34 HDMIOUT LY PR/CR PB/CB COAXIAL DIGITAL OUT PCM / BITSTREAM R AUDIO OUT VIDEO OUT COMPONENT VIDEO OUT 56 1. AC power cord • Connect to a standard AC outlet to supply power to this unit. • Unplug this cord from the AC outlet to completely turn off the unit. 2. HDMI OUT jack • Use to connect a TV with an HDMI compatible port with an HDMI cable. 3. AUDIO OUT jacks • Use to connect a TV, an AV receiver / amplifier or other device with an RCA audio cable. 4. COMPONENT VIDEO OUT jacks • Use to connect a TV with component video inputs with an RCA component video cable. 5. DIGITAL OUT (COAXIAL) jack • Use to connect an AV receiver / amplifier, Dolby Digital / DTS decoder or other device with a digital audio coaxial input jack with a digital audio RCA cable. 6. VIDEO OUT jack • Use to connect a TV, an AV receiver or other device with an RCA video cable. Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. • This unit does not have the RF modulator. EN 7